foratvise
Get Started
Process defects (scrap and rework)

Incorrect or Illegible Product Coding

Process defects (scrap and rework)QualityLabeling and coding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 85 studies that could observe it (sparse evidence).

What happens

The coding/printing unit (ink-jet, thermal transfer or laser coder) applies a date, batch or lot code that is wrong, incomplete, smeared or illegible on the package or label due to worn print heads, clogged nozzles, poor substrate contact, misaligned coder position or an incorrect code template loaded in the controller. Units with defective coding fail traceability or legibility requirements at inspection and are classified as first-pass defects even though the product itself is otherwise conforming.

What is done about it

Apply a preventive maintenance schedule for print heads and nozzles (cleaning, ink/solvent replacement, alignment checks), validate the correct code template and parameters before each run start, and use closed-loop vision verification that automatically rejects and logs non-conforming codes while alerting the operator before defects accumulate.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.7%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
48% [36–59%]
Studies / units
85 / 113
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.0% [0.1–3.6%]11 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.1%]29 studies
  • Brewing, wine and spirits
    0.7% [0.1–2.7%]13 studies
  • Bakery and pasta
    0.8% [0.1–2.9%]1 study
  • Meat, poultry and seafood
    0.7% [0.1–2.9%]4 studies
  • Fruit and vegetable processing
    0.8% [0.1–3.0%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–2.9%]3 studies
  • Sugar and confectionery
    0.7% [0.1–2.8%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.8%]4 studies
  • Animal feed and pet food
    0.7% [0.1–2.8%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.8%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The coding/printing unit (ink-jet, thermal transfer or laser coder) applies a date, batch or lot code that is wrong, incomplete, smeared or illegible on the package or label due to worn print heads, clogged nozzles, poor substrate contact, misaligned coder position or an incorrect code template loaded in the controller. Units with defective coding fail traceability or legibility requirements at inspection and are classified as first-pass defects even though the product itself is otherwise conforming.

How it looks in SCADA data

Engineering guidance

Vision or code-verification system at the labeling/coding station records a rise in reject counts tagged as code mismatch, missing field or low contrast, often without a corresponding machine stop. Coder alarm logs may show nozzle fault, low ink level or print-head temperature deviations, and reject spikes correlate in time with coder maintenance or template-change events.

Countermeasure

Engineering guidance

Apply a preventive maintenance schedule for print heads and nozzles (cleaning, ink/solvent replacement, alignment checks), validate the correct code template and parameters before each run start, and use closed-loop vision verification that automatically rejects and logs non-conforming codes while alerting the operator before defects accumulate.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 24.4 Ton · as reported: “Mal Codificado”
    Show verbatim quote
    los resultados mostrados por reproceso debido a mal codificado se redujeron durante el periodo de ejecución de 31.5 a 24.4 toneladas, un beneficio del 22.4%.
  2. Lost time: 31.5 Ton · as reported: “Mal Codificado”
    Show verbatim quote
    los resultados mostrados por reproceso debido a mal codificado se redujeron durante el periodo de ejecución de 31.5 a 24.4 toneladas, un beneficio del 22.4%.