foratvise
Get Started
Process defects (scrap and rework)

Incorrect label application

Process defects (scrap and rework)QualityLabeling and coding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 85 studies that could observe it (sparse evidence).

What happens

The labeling station applies a label that is wrong, misaligned, skewed, missing required information, or not matched to the product/format running, due to incorrect label stock loaded, misregistration of the applicator, print-and-apply errors, or sensor mismatch between product and label data.

What is done about it

Verify and lock label stock and print data against the active recipe before run start, use automated vision or barcode verification with reject-and-divert logic at the labeler, and enforce changeover checklists that confirm label artwork matches product format.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–1.9%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
48% [36–59%]
Studies / units
85 / 113
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.7% [0.1–2.8%]11 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.2%]29 studies
  • Brewing, wine and spirits
    0.7% [0.1–2.7%]13 studies
  • Bakery and pasta
    0.8% [0.1–3.1%]1 study
  • Meat, poultry and seafood
    0.8% [0.1–2.8%]4 studies
  • Fruit and vegetable processing
    0.8% [0.1–3.0%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–2.8%]3 studies
  • Sugar and confectionery
    0.8% [0.1–3.1%]3 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.7%]4 studies
  • Animal feed and pet food
    0.8% [0.1–2.9%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.1% [0.1–4.0%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The labeling station applies a label that is wrong, misaligned, skewed, missing required information, or not matched to the product/format running, due to incorrect label stock loaded, misregistration of the applicator, print-and-apply errors, or sensor mismatch between product and label data.

How it looks in SCADA data

Engineering guidance

MES/vision inspection logs show label-verification rejects or mismatched barcode/text reads at the labeler, often with no stoppage recorded, only an increase in reject counter and downgrade or rework flags on affected units. Print-and-apply controllers may log print-quality or registration faults correlated with the reject spike.

Countermeasure

Engineering guidance

Verify and lock label stock and print data against the active recipe before run start, use automated vision or barcode verification with reject-and-divert logic at the labeler, and enforce changeover checklists that confirm label artwork matches product format.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 14.5 % · as reported: “incorrect labeling”
    Show verbatim quote
    Esta situación fue originada por cuatro causas raíz: averías en equipos (35.41%), elevados tiempos de setup (17.38%), producto final golpeado (32.69%) y etiquetado incorrecto (14.52%)