foratvise
Get Started
Setup and adjustments

Manual ingredient loading into filling tank

Setup and adjustmentsAvailabilityFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

Operators manually add ingredients to the filling tank from bulk containers or bags, which requires opening and emptying the packaging, handling residues and repositioning containers. This replenishment task interrupts or delays the filling cycle because the tank cannot be fed and discharged at the same time, and the duration depends on the package format used (large totes versus small bags).

What is done about it

Replace manual bag or tote emptying with automated bulk unloading or dosing stations connected directly to the tank, and standardize ingredient package formats to reduce handling variability. Pre-stage ingredients near the tank and schedule replenishment to overlap with other planned changeover tasks to minimize line interruption.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.3% [0.1–1.0%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
56% [44–67%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.4%]18 studies
  • Soft drinks, bottled water and juices
    0.3% [0.0–1.1%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.5%]16 studies
  • Bakery and pasta
    0.4% [0.0–1.7%]0 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.6%]6 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.6%]4 studies
  • Grain and oilseed milling
    0.4% [0.0–1.6%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.7%]6 studies
  • Animal feed and pet food
    0.4% [0.0–1.5%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.4%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Operators manually add ingredients to the filling tank from bulk containers or bags, which requires opening and emptying the packaging, handling residues and repositioning containers. This replenishment task interrupts or delays the filling cycle because the tank cannot be fed and discharged at the same time, and the duration depends on the package format used (large totes versus small bags).

How it looks in SCADA data

Engineering guidance

Tank level trace shows stepwise rises coinciding with filler idle or standby machine-state periods, and the filling line downstream shows starvation while the tank is being charged. Cycle time between consecutive batches lengthens in a pattern correlated with ingredient package size, without any fault or alarm being triggered.

Countermeasure

Engineering guidance

Replace manual bag or tote emptying with automated bulk unloading or dosing stations connected directly to the tank, and standardize ingredient package formats to reduce handling variability. Pre-stage ingredients near the tank and schedule replenishment to overlap with other planned changeover tasks to minimize line interruption.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Mean event duration: 10.0 min · as reported: “Adição de ingredientes no tanque (sacos de 25kg)”
    Show verbatim quote
    quando se trabalhava com sacos de 25kg o tempo de adição no tanque era de aproximadamente 10 minutos para enchê-lo.
  2. Mean event duration: 1.22 min · as reported: “Adição de ingredientes no tanque (embalagens de 600kg)”
    Show verbatim quote
    Quando utilizavam ingredientes em embalagens de 600kg o tempo de abastecimento do tanque era de apenas 1,22 minutos, logo esta causa foi validada pela equipe do projeto.