foratvise
Get Started
Process defects (scrap and rework)

Off-spec liquid product from pasteurized base tank

Process defects (scrap and rework)QualityPasteurization

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 26 studies that could observe it (sparse evidence).

What happens

Variability in pasteurization temperature, holding time or incoming raw material composition causes the liquid base product held in the pasteurized base tank to fall outside the quality specification (e.g., composition, acidity, microbial or physical parameters). Quality control detects the deviation at the tank and the batch is downgraded, reworked or scrapped before it can proceed to downstream processing.

What is done about it

Tighten closed-loop control and calibration of pasteurization temperature and holding-time instrumentation, and verify incoming raw material specifications before batching. Implement automatic diversion of out-of-spec batches and root-cause tracking linking tank quality deviations to upstream process variables.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
1.0% [0.2–3.4%]
Expected share of lost time
0.5% [0.1–1.6%]
Share of lost time when present
48% [35–60%]
Studies / units
26 / 29
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.7% [0.2–6.8%]6 studies
  • Soft drinks, bottled water and juices
    1.2% [0.1–5.1%]1 study
  • Brewing, wine and spirits
    1.3% [0.1–5.3%]0 studies
  • Bakery and pasta
    1.2% [0.1–4.9%]0 studies
  • Meat, poultry and seafood
    1.3% [0.1–5.2%]0 studies
  • Fruit and vegetable processing
    1.2% [0.1–5.1%]2 studies
  • Grain and oilseed milling
    1.3% [0.1–5.4%]0 studies
  • Sugar and confectionery
    1.3% [0.1–5.1%]3 studies
  • Snacks, coffee, tea and other foods
    1.2% [0.1–4.9%]3 studies
  • Animal feed and pet food
    1.2% [0.1–4.6%]4 studies
  • Food manufacturing (unspecified or mixed)
    1.2% [0.1–4.8%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Variability in pasteurization temperature, holding time or incoming raw material composition causes the liquid base product held in the pasteurized base tank to fall outside the quality specification (e.g., composition, acidity, microbial or physical parameters). Quality control detects the deviation at the tank and the batch is downgraded, reworked or scrapped before it can proceed to downstream processing.

How it looks in SCADA data

Engineering guidance

MES/SCADA shows batch quality parameters (temperature, pH, Brix, holding time) drifting outside control limits during or after the pasteurization hold, often paired with a quality-hold or reject flag on the tank batch record. Tank level or transfer logs may show the batch diverted to a rework or drain line instead of the normal downstream route.

Countermeasure

Engineering guidance

Tighten closed-loop control and calibration of pasteurization temperature and holding-time instrumentation, and verify incoming raw material specifications before batching. Implement automatic diversion of out-of-spec batches and root-cause tracking linking tank quality deviations to upstream process variables.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 35.5 Ton · as reported: “Producto Liquido”
    Show verbatim quote
    se redujeron las condiciones de reproceso en el periodo comparativo trimestral en el caso de producto líquido de 59.1 a 35.5 toneladas un beneficio del 40.1%
  2. Lost time: 59.1 Ton · as reported: “Producto Liquido”
    Show verbatim quote
    se redujeron las condiciones de reproceso en el periodo comparativo trimestral en el caso de producto líquido de 59.1 a 35.5 toneladas un beneficio del 40.1%