foratvise
Get Started
Equipment failure (breakdowns)

Oven wheel malfunction (blow molding)

Equipment failure (breakdowns)AvailabilityForming, moulding and depositing

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 0 of the 76 studies that could observe it (sparse evidence).

What happens

The rotary oven wheel carries preforms or parisons through the heating stations prior to the blow molding stage; wear or misalignment of its chain, bearings, grippers or indexing mechanism causes it to jam, stall or lose synchronisation, forcing an operator or technician to intervene manually on the wheel. Debris, dropped preforms or thermal distortion of wheel components can also trigger the stoppage.

What is done about it

Perform preventive inspection and lubrication of the wheel chain, bearings and grippers, verify indexing and synchronisation settings, and promptly clear jammed preforms or debris; replace worn mechanical components and realign the wheel to its drive to avoid repeated manual interventions.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.4%]
Expected share of lost time
0.3% [0.0–0.8%]
Share of lost time when present
58% [47–68%]
Studies / units
76 / 96
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]5 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–2.0%]11 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.3%]0 studies
  • Bakery and pasta
    0.5% [0.1–1.8%]25 studies
  • Meat, poultry and seafood
    0.6% [0.0–2.3%]3 studies
  • Fruit and vegetable processing
    0.6% [0.0–2.2%]3 studies
  • Grain and oilseed milling
    0.6% [0.1–2.4%]0 studies
  • Sugar and confectionery
    0.5% [0.1–2.1%]8 studies
  • Snacks, coffee, tea and other foods
    0.5% [0.1–2.1%]7 studies
  • Animal feed and pet food
    0.6% [0.1–2.3%]6 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]8 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The rotary oven wheel carries preforms or parisons through the heating stations prior to the blow molding stage; wear or misalignment of its chain, bearings, grippers or indexing mechanism causes it to jam, stall or lose synchronisation, forcing an operator or technician to intervene manually on the wheel. Debris, dropped preforms or thermal distortion of wheel components can also trigger the stoppage.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show the oven or blow module entering a fault or stopped state with wheel-rotation or servo-position alarms, often paired with a jam or torque-overload alarm on the wheel drive; downstream blow molding and filling stations starve while the wheel is stopped for intervention, and the event is recorded as a discrete downtime entry requiring operator acknowledgement.

Countermeasure

Engineering guidance

Perform preventive inspection and lubrication of the wheel chain, bearings and grippers, verify indexing and synchronisation settings, and promptly clear jammed preforms or debris; replace worn mechanical components and realign the wheel to its drive to avoid repeated manual interventions.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 149 menit · as reported: “Oven Wheel Intervension”
    Show verbatim quote
    Oven Wheel Intervension 149