foratvise
Get Started
organizational external

Overnight production suspension

organizational externalForming, moulding and depositing

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 1 of the 76 studies that could observe it (sparse evidence).

What happens

An organizational decision halts the forming operation before it can be completed or resumed, so the line is left idle until the next working day rather than restarted within the same shift. This typically stems from scheduling, staffing, material supply or demand constraints rather than an equipment malfunction.

What is done about it

Improve production and material planning so that operations scheduled for a given day can be completed or properly closed out without an unplanned overnight gap, including better coordination of raw material availability, staffing and order sequencing. Where overnight suspension is unavoidable, standardize shutdown and restart procedures to minimize the yield and time impact of the interruption.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
59% [49–70%]
Studies / units
76 / 96
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–2.8%]5 studies
  • Soft drinks, bottled water and juices
    0.8% [0.1–2.8%]11 studies
  • Brewing, wine and spirits
    0.8% [0.1–3.1%]0 studies
  • Bakery and pasta
    1.0% [0.1–3.2%]25 studies
  • Meat, poultry and seafood
    0.8% [0.1–3.1%]3 studies
  • Fruit and vegetable processing
    0.8% [0.1–2.8%]3 studies
  • Grain and oilseed milling
    0.8% [0.1–3.1%]0 studies
  • Sugar and confectionery
    0.8% [0.1–2.8%]8 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.8%]7 studies
  • Animal feed and pet food
    0.8% [0.1–3.0%]6 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.9%]8 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

An organizational decision halts the forming operation before it can be completed or resumed, so the line is left idle until the next working day rather than restarted within the same shift. This typically stems from scheduling, staffing, material supply or demand constraints rather than an equipment malfunction.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show the forming station transitioning to an idle or stopped state with no alarms and no production counts, and that state persists across the shift boundary into the next calendar day before any new cycle starts. Downtime reports classify the gap as a planned or organizational stop rather than a fault-triggered event.

Countermeasure

Engineering guidance

Improve production and material planning so that operations scheduled for a given day can be completed or properly closed out without an unplanned overnight gap, including better coordination of raw material availability, staffing and order sequencing. Where overnight suspension is unavoidable, standardize shutdown and restart procedures to minimize the yield and time impact of the interruption.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 900 min · as reported: “Suspensión de operación hasta el día siguiente”
    Show verbatim quote
    Suspensión de operación hasta el día siguiente | 900