foratvise
Get Started
Equipment failure (breakdowns)

Raw material receiving equipment failure

Equipment failure (breakdowns)AvailabilityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

Mechanical or electrical breakdown of the bulk intake equipment used to unload and transfer incoming raw materials such as grains and meals, including intake pits, screw or belt conveyors, bucket elevators, dump hoppers and weighing or dosing devices. Wear, overload, foreign objects or electrical faults stop the receiving line and require maintenance intervention before unloading can resume.

What is done about it

Apply preventive and condition-based maintenance on conveyors, elevators and weighing equipment, including bearing and belt inspection, overload protection tuning and removal of foreign material before intake. Install magnetic separators or screens upstream and keep critical spare parts available to shorten repair time.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
58% [46–68%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.2%]13 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.0%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.3%]11 studies
  • Bakery and pasta
    0.6% [0.1–2.1%]24 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.4%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.3%]7 studies
  • Grain and oilseed milling
    0.7% [0.1–2.5%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.4%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]5 studies
  • Animal feed and pet food
    1.0% [0.1–3.7%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.4%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Mechanical or electrical breakdown of the bulk intake equipment used to unload and transfer incoming raw materials such as grains and meals, including intake pits, screw or belt conveyors, bucket elevators, dump hoppers and weighing or dosing devices. Wear, overload, foreign objects or electrical faults stop the receiving line and require maintenance intervention before unloading can resume.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show the receiving conveyor, elevator or scale changing to a fault or stopped state with motor overload, drive fault or sensor-out-of-range alarms, accompanied by a drop in intake throughput counters. Downstream storage or processing equipment may show starvation while the receiving sector remains in an unplanned stop state awaiting repair.

Countermeasure

Engineering guidance

Apply preventive and condition-based maintenance on conveyors, elevators and weighing equipment, including bearing and belt inspection, overload protection tuning and removal of foreign material before intake. Install magnetic separators or screens upstream and keep critical spare parts available to shorten repair time.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 36.9 Kg.h-1 · as reported: “Receiving sector (corn grains)”
    Show verbatim quote
    Receiving 1071 0.652 ± 0.128 36.899 ± 7.584 Kg 82.32
  2. Lost time: 3.65 Kg.h-1 · as reported: “Receiving sector (soybean meal)”
    Show verbatim quote
    Receiving 171 0.036 ± 0.005 3.652 ± 0.531 Kg 21.88
  3. Lost time: 0.752 Kg.h-1 · as reported: “Receiving (vegetal meals)”
    Show verbatim quote
    2Receiving 9.40 0.080 ± 0.018 0.752 ± 0.169 Kg 9.40