Whole plant or unspecified
Whole line or unspecified equipment
Physical model
Evidence synthesis only
This operation is covered by the evidence synthesis only; its limits are set by the operations around it.
Causes of loss in this operation
Probability that each cause is documented as a relevant loss of a line, pooled over all segments.
- Unplanned equipment breakdownEquipment failure (breakdowns)11% [6–18%]A127 studies
- Changeover / setup timeSetup and adjustments11% [6–17%]A127 studies
- Miscellaneous and unclassified lossesnot classifiable10% [5–17%]A127 studies
- Raw material shortage or nonconformanceorganizational external3.1% [1.3–5.9%]A127 studies
- Idling and minor stoppagesIdling and minor stops (micro-stops)1.9% [0.6–4.1%]B127 studies
- Unspecified process defectsProcess defects (scrap and rework)1.7% [0.6–3.7%]B127 studies
- Maintenance Program Downtime (Planned and Reactive)planned downtime1.6% [0.5–3.6%]B127 studies
- Waiting for Raw Material or Ingredient Supplyorganizational external1.5% [0.5–3.5%]B127 studies
- Rework of off-specification productProcess defects (scrap and rework)1.5% [0.5–3.4%]B127 studies
- Mechanical, electrical or pneumatic component failureEquipment failure (breakdowns)1.4% [0.5–3.2%]B127 studies
- Product scrap and rejectionProcess defects (scrap and rework)1.3% [0.4–2.9%]C127 studies
- Miscellaneous non-specific line stoppageorganizational external1.3% [0.4–2.9%]C127 studies
- Glass container breakageProcess defects (scrap and rework)1.2% [0.3–2.8%]C127 studies
- Reduced speed loss (cause not specified)Reduced speed1.2% [0.3–2.8%]C127 studies
- Lack of demand or input material shortageorganizational external1.0% [0.3–2.5%]C127 studies
- 1.0% [0.3–2.3%]C127 studies
- Workplace disorder / poor housekeepingIdling and minor stops (micro-stops)1.0% [0.3–2.4%]C127 studies
- Unspecified production or food wastenot classifiable1.0% [0.3–2.3%]C127 studies
- Cleaning and sanitation downtimeSetup and adjustments1.0% [0.3–2.3%]C127 studies
- Transfer and material handling delayIdling and minor stops (micro-stops)0.9% [0.2–2.3%]C127 studies
- Line Startup DelaySetup and adjustments0.9% [0.3–2.2%]C127 studies
- Product Loss in Transfer LinesStart-up losses (reduced yield)0.9% [0.2–2.1%]C127 studies
- Pump failureEquipment failure (breakdowns)0.8% [0.2–2.0%]C127 studies
- Ingredient weighing station fault or delayEquipment failure (breakdowns)0.8% [0.2–2.0%]C127 studies
- Equipment down under repairEquipment failure (breakdowns)0.8% [0.2–2.0%]C127 studies
- Automation and instrumentation failureEquipment failure (breakdowns)0.8% [0.2–2.0%]C127 studies
- Stoppage due to spare parts shortageorganizational external0.8% [0.2–1.9%]C127 studies
- Delay in upstream supply or support processorganizational external0.8% [0.2–1.9%]C127 studies
- Scheduled preventive maintenanceplanned downtime0.8% [0.2–1.9%]C127 studies
- Planned schedule shutdownplanned downtime0.8% [0.2–1.9%]C127 studies
- Workforce / staffing shortageorganizational external0.7% [0.2–1.8%]C127 studies
- Organizational Stoppage (Personnel or Material Shortage)organizational external0.7% [0.2–1.8%]C127 studies
- Container cracking and contaminationProcess defects (scrap and rework)0.7% [0.2–1.8%]C127 studies
- Power supply disruptionorganizational external0.7% [0.2–1.9%]C127 studies
- Defective containers and closures (warped bottles, cap defects)Process defects (scrap and rework)0.7% [0.2–1.8%]C127 studies
- Micro-stoppages with reduced running speedIdling and minor stops (micro-stops)0.7% [0.2–1.8%]C127 studies
- Changeover disassembly, cleaning and reassembly of machine partsSetup and adjustments0.7% [0.2–1.8%]C127 studies
- Equipment calibration/adjustment errorSetup and adjustments0.7% [0.2–1.7%]C127 studies
- Station cycle time constraintReduced speed0.7% [0.1–1.8%]D127 studies
- Parasitic machine speed lossesReduced speed0.6% [0.1–1.7%]D127 studies
- Storage silo equipment failure (bulk raw material)Equipment failure (breakdowns)0.6% [0.1–1.6%]D127 studies
- Raw material receiving equipment failureEquipment failure (breakdowns)0.6% [0.1–1.5%]D127 studies
- Product loss from bulk material handling equipment failureEquipment failure (breakdowns)0.6% [0.1–1.6%]D127 studies
- Mechanical component failureEquipment failure (breakdowns)0.6% [0.1–1.5%]D127 studies
- Ingredient/Component Addition Equipment FailureEquipment failure (breakdowns)0.6% [0.1–1.5%]D127 studies
- Operator procedural error during operationsorganizational external0.6% [0.1–1.5%]D127 studies
- Scheduled maintenance and cleaning stop (excluded from OEE)planned downtime0.6% [0.1–1.5%]D127 studies
- Microbiological non-conformity of raw material during conditioningProcess defects (scrap and rework)0.6% [0.1–1.5%]D127 studies
- Raw material queuing/waiting delay (staging or weighing)organizational external0.6% [0.1–1.4%]D127 studies
- Raw material backlog awaiting processingorganizational external0.5% [0.1–1.5%]D127 studies
- Raw material staging congestion (frequent pallet relocation)organizational external0.5% [0.1–1.4%]D127 studies
- Waiting for supervisor or maintenance instructionsorganizational external0.5% [0.1–1.5%]D127 studies
- Sensor fouling or malfunctionEquipment failure (breakdowns)0.5% [0.1–1.5%]D127 studies
- Inaccurate inventory recordsorganizational external0.5% [0.1–1.5%]D127 studies
- Unspecified process delaynot classifiable0.5% [0.1–1.4%]D127 studies
- Reduced speed and minor stoppages (unspecified)not classifiable0.5% [0.1–1.5%]D127 studies
- Miscommunication between operatorsorganizational external0.5% [0.1–1.5%]D127 studies
- Inadequate Inventory Rotation (FIFO/FEFO Failure)Process defects (scrap and rework)0.5% [0.1–1.5%]D127 studies
- Inefficient maintenance spare parts inventory managementorganizational external0.5% [0.1–1.5%]D127 studies
- Raw material/ingredient transport shortageorganizational external0.5% [0.1–1.5%]D127 studies
- Planned maintenance stopplanned downtime0.5% [0.1–1.4%]D127 studies
- Insufficient operator trainingorganizational external0.5% [0.1–1.4%]D127 studies
- Improper machine speed settingProcess defects (scrap and rework)0.5% [0.1–1.5%]D127 studies
- Excessive polishing machine pressureProcess defects (scrap and rework)0.5% [0.1–1.4%]D127 studies
- Operator-related inefficiencyorganizational external0.5% [0.1–1.5%]D127 studies
- Delayed eviscerationProcess defects (scrap and rework)0.5% [0.1–1.4%]D127 studies
- Tool/material search time due to lack of visual workplace organizationorganizational external0.5% [0.1–1.4%]D127 studies
- Labeling and cap/seal defectsProcess defects (scrap and rework)0.5% [0.1–1.4%]D127 studies
- Fill level and label adhesion nonconformanceProcess defects (scrap and rework)0.5% [0.1–1.4%]D127 studies
- Component fouling from residue and degraded lubricantIdling and minor stops (micro-stops)0.5% [0.1–1.4%]D127 studies
- Metal detector or inkjet coder malfunctionIdling and minor stops (micro-stops)0.5% [0.1–1.4%]D127 studies
- Head Sensor AdjustmentSetup and adjustments0.5% [0.1–1.3%]D127 studies
- Changeover retooling and team briefing downtimeSetup and adjustments0.5% [0.1–1.4%]D127 studies
- Waiting for supervisor confirmation/authorizationSetup and adjustments0.5% [0.1–1.4%]D127 studies
- Manual transfer of product trays to cold storageSetup and adjustments0.5% [0.1–1.3%]D127 studies
- Motor overcurrent verification during changeover adjustmentSetup and adjustments0.5% [0.1–1.4%]D127 studies
- Changeover delay due to searching for and fetching tools/utensilsSetup and adjustments0.5% [0.1–1.3%]D127 studies
- Product loss at start-up/shut-down due to line designStart-up losses (reduced yield)0.5% [0.1–1.3%]D127 studies
- Control system / software faultEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Gasket wear and replacementEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Equipment failure from deficient basic care (overheating, blockages)Equipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Component wear and tearEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Automatic lubricator (oiler) failureEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- V-belt breakage or slippageEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Water ingress / leak from rain into equipmentEquipment failure (breakdowns)0.4% [0.1–1.1%]D127 studies
- Scheduled overtime / extra production hoursplanned downtime0.4% [0.1–1.1%]D127 studies
- Unspecified quality or process issuenot classifiable0.4% [0.1–1.1%]D127 studies
- External supply disruption (utilities or spare parts)organizational external0.4% [0.1–1.1%]D127 studies
- Scheduled Operator Breaksplanned downtime0.4% [0.1–1.1%]D127 studies
- Operator assessment delayorganizational external0.4% [0.1–1.1%]D127 studies
- Unspecified equipment failure or adjustment stopnot classifiable0.4% [0.1–1.1%]D127 studies
- Combined breakdown and changeover downtimenot classifiable0.4% [0.1–1.1%]D127 studies
- Inadequate real-time detection of defective materialsProcess defects (scrap and rework)0.4% [0.1–1.1%]D127 studies
- Unspecified bottling line cycle time lossnot classifiable0.4% [0.1–1.1%]D127 studies
- Scheduled cleaning following equipment modificationplanned downtime0.4% [0.1–1.0%]D127 studies
- Delay awaiting quality laboratory analysis (titratable acidity)organizational external0.4% [0.1–1.1%]D127 studies
- Deficient visual management / communication of standardsorganizational external0.4% [0.1–1.0%]D127 studies
- Batch product out of composition specificationProcess defects (scrap and rework)0.4% [0.1–1.0%]D127 studies
- Packaging material shortage (cans, bottles, crates, labels, crowns)organizational external0.4% [0.1–1.0%]D127 studies
- Human error in calibration or operationIdling and minor stops (micro-stops)0.3% [0.1–1.0%]D127 studies
- Extended setup time after weekend shutdownSetup and adjustments0.3% [0.1–1.0%]D127 studies
- Equipment installation time during changeoverSetup and adjustments0.3% [0.1–1.0%]D127 studies
- Yield loss during start-up/transitionStart-up losses (reduced yield)0.3% [0.0–1.0%]D127 studies

