Rotary conveyor dry-run failure
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 86 studies that could observe it (sparse evidence).
What happens
A rotary conveying element (turntable, rotary accumulator or star-wheel) continues to turn while no containers are present on it, so the drive train and bearings run unloaded for a sustained period. The lack of product load changes friction and vibration patterns, accelerating wear or overheating of the drive, gearbox or bearings until the unit trips or breaks down and requires repair.
What is done about it
Interlock the rotary drive to reduce speed or stop automatically when container presence sensors confirm the unit is running empty beyond a set interval, and route an alert to the operator before damage occurs. Complement this with preventive lubrication and vibration/current monitoring of the drive and bearings to catch early degradation from repeated empty-running cycles.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.3%]
- Expected share of lost time
- 0.3% [0.0–0.7%]
- Share of lost time when present
- 57% [46–68%]
- Studies / units
- 86 / 112
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.5% [0.0–1.9%]11 studies
- Soft drinks, bottled water and juices0.5% [0.0–1.6%]28 studies
- Brewing, wine and spirits0.5% [0.0–1.8%]12 studies
- Bakery and pasta0.5% [0.1–2.0%]0 studies
- Meat, poultry and seafood0.5% [0.1–1.9%]5 studies
- Fruit and vegetable processing0.5% [0.0–2.2%]4 studies
- Grain and oilseed milling0.5% [0.0–2.1%]4 studies
- Sugar and confectionery0.5% [0.0–2.0%]4 studies
- Snacks, coffee, tea and other foods0.5% [0.0–2.1%]4 studies
- Animal feed and pet food0.6% [0.0–2.3%]5 studies
- Food manufacturing (unspecified or mixed)0.5% [0.0–2.0%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA rotary conveying element (turntable, rotary accumulator or star-wheel) continues to turn while no containers are present on it, so the drive train and bearings run unloaded for a sustained period. The lack of product load changes friction and vibration patterns, accelerating wear or overheating of the drive, gearbox or bearings until the unit trips or breaks down and requires repair.
How it looks in SCADA data
Engineering guidanceMES/SCADA shows the rotary unit's run signal active with container presence sensors reporting empty for an extended span, followed by a fault alarm (overload, overcurrent or high vibration) and a change to a fault/stopped machine state. Upstream or downstream equipment may show starvation or blocking around the same timeframe, and the fault recurs intermittently before a sustained unplanned stop.
Countermeasure
Engineering guidanceInterlock the rotary drive to reduce speed or stop automatically when container presence sensors confirm the unit is running empty beyond a set interval, and route an alert to the operator before damage occurs. Complement this with preventive lubrication and vibration/current monitoring of the drive and bearings to catch early degradation from repeated empty-running cycles.
4Sources
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceLost time: 205 min · as reported: “rotary empty”
Show verbatim quote
rotary empty 14 205 295 5387 88.32 85.89
- ANALISIS TOTAL PRODUCTIVE MAINTENANCE PADA LINE 8/CARBONATED SOFT DRINK PT COCA-COLA BOTTLING INDONESIA CENTRAL JAVA (2012)Open sourceNumber of events: 14.0 events · as reported: “rotary empty”
Show verbatim quote
rotary empty 14 205 295 5387 88.32 85.89

