foratvise
Get Started
Equipment failure (breakdowns)

Weighing scale failure (electrical or mechanical)

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 61 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).

What happens

The weighing scale used to control or verify fill weight loses accurate or stable function due to an electrical fault (load cell, wiring, power supply, controller) or a mechanical fault (worn or jammed weighing mechanism, misalignment, debris), stopping the filling operation until repaired.

What is done about it

Apply preventive maintenance and periodic calibration of load cells and mechanical weighing components, with condition monitoring of signal stability and quick-swap spare modules to restore the scale to specification rapidly.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
61% [50–72%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.1%]18 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.0%]44 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.1%]16 studies
  • Bakery and pasta
    0.7% [0.1–2.6%]0 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.2%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.3%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.5%]6 studies
  • Sugar and confectionery
    0.7% [0.1–2.5%]3 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]6 studies
  • Animal feed and pet food
    0.7% [0.1–2.4%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.4%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The weighing scale used to control or verify fill weight loses accurate or stable function due to an electrical fault (load cell, wiring, power supply, controller) or a mechanical fault (worn or jammed weighing mechanism, misalignment, debris), stopping the filling operation until repaired.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows the filler or scale entering a fault or stopped state with an associated electrical or mechanical fault alarm code, erratic or frozen weight readings before the stop, and downstream starvation with upstream blocking while maintenance intervenes.

Countermeasure

Engineering guidance

Apply preventive maintenance and periodic calibration of load cells and mechanical weighing components, with condition monitoring of signal stability and quick-swap spare modules to restore the scale to specification rapidly.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 67.0 % · as reported: “Falha na balança”
    Show verbatim quote
    a equipe do projeto analisou todos estes dados e pode verificar que os problemas com a balança representavam 67 % das paradas na enchedora, e destes problemas, os elétricos representavam 98 % das paradas enquanto que os mecânicos representavam apenas 2 %.
  2. Share of lost time: 98.0 % · as reported: “Falha elétrica na balança”
    Show verbatim quote
    os problemas com a balança representavam 67 % das paradas na enchedora, e destes problemas, os elétricos representavam 98 % das paradas enquanto que os mecânicos representavam apenas 2 %.
  3. Share of lost time: 2.00 % · as reported: “Falha mecânica na balança”
    Show verbatim quote
    os problemas com a balança representavam 67 % das paradas na enchedora, e destes problemas, os elétricos representavam 98 % das paradas enquanto que os mecânicos representavam apenas 2 %.