foratvise
Get Started
Equipment failure (breakdowns)

Thresher mechanical/electrical failure

Equipment failure (breakdowns)AvailabilitySeparation (centrifugation, filtration, membranes)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 37 studies that could observe it (sparse evidence).

What happens

Unplanned loss of thresher function occurs when a mechanical component (drum, concave, beater, bearing, belt or drive) wears, breaks or seizes, or when an electrical/control fault trips the drive, interrupting the separation of product from residual material. The stop requires maintenance intervention to repair or replace the failed part before the machine can resume normal separation duty.

What is done about it

Apply condition-based and preventive maintenance on drive, bearings, belts and threshing components (lubrication, alignment, vibration monitoring, scheduled replacement of wear parts) and keep critical spares available to reduce repair time when a failure occurs.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–2.0%]
Expected share of lost time
0.3% [0.0–1.1%]
Share of lost time when present
57% [46–67%]
Studies / units
37 / 44
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.7% [0.1–2.8%]5 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.9%]1 study
  • Brewing, wine and spirits
    0.7% [0.1–3.0%]1 study
  • Bakery and pasta
    0.7% [0.1–3.0%]0 studies
  • Meat, poultry and seafood
    0.7% [0.1–3.0%]2 studies
  • Fruit and vegetable processing
    0.7% [0.1–3.0%]3 studies
  • Grain and oilseed milling
    0.7% [0.1–3.0%]6 studies
  • Sugar and confectionery
    0.7% [0.1–3.0%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.8%]4 studies
  • Animal feed and pet food
    0.7% [0.1–2.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.6%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Unplanned loss of thresher function occurs when a mechanical component (drum, concave, beater, bearing, belt or drive) wears, breaks or seizes, or when an electrical/control fault trips the drive, interrupting the separation of product from residual material. The stop requires maintenance intervention to repair or replace the failed part before the machine can resume normal separation duty.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows the thresher state transitioning to fault or down with an associated alarm (motor overload, drive fault, bearing temperature, vibration or torque out of range), an extended downtime duration logged against a maintenance work order, and starvation or blocking of upstream and downstream separation/conveying equipment during the stop.

Countermeasure

Engineering guidance

Apply condition-based and preventive maintenance on drive, bearings, belts and threshing components (lubrication, alignment, vibration monitoring, scheduled replacement of wear parts) and keep critical spares available to reduce repair time when a failure occurs.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 0.370 % · as reported: “Equipment Failure Losses”
    Show verbatim quote
    Faktor yang memiliki persentase terbesar dari faktor six big losses pada mesin thresher adalah Idling and Minor Stoppage Losses sebesar 1% dan Equipment Failure Losses sebesar 0,37%.