foratvise
Get Started
Included study

ANALISA PERFORMANCE THRESER DI PABRIK KELAPA SAWIT (PKS) PTPN V SEI GARO DENGAN METODE OVERALL EQUIPMENT EFFECTIVINESS (OEE) DAN 5S

Open source

1Bibliographic record

Authors
Mahyunis Mahyunis, Zulham Effendi, Levi Rentiana Tinambunan
Year
2023
Venue
Jurnal Agro Fabrica
Country
Indonesia
Segment
Grain and oilseed milling
Process family
Slaughter, cutting and primary processing
Study type
Single case study
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
60 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
Penelitian ini dilaksanakan di Pabrik Kelapa Sawit (PKS) PTPN V PKS Sei Garo kapasitas 30 Ton/Jam.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 12Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
Equipment Failure LossesThresher
Show verbatim quote (Kesimpulan / Table 6)
Faktor yang memiliki persentase terbesar dari faktor six big losses pada mesin thresher adalah Idling and Minor Stoppage Losses sebesar 1% dan Equipment Failure Losses sebesar 0,37%.
Equipment failure (breakdowns)Share of lost time0.370 %Both extractors agreed
Idling and Minor Stoppage LossesThresher
Show verbatim quote (Kesimpulan / Table 6)
Faktor yang memiliki persentase terbesar dari faktor six big losses pada mesin thresher adalah Idling and Minor Stoppage Losses sebesar 1% dan Equipment Failure Losses sebesar 0,37%.
Idling and minor stops (micro-stops)Share of lost time1.00 %Both extractors agreed
—Thresher
Show verbatim quote (Section c / Table 4)
Nilai dari rate of quality products dari mesin thresher diperoleh nilai sekitar 0% s/d 100% dengan ratarata nilai rate of quality products sebesar 100%.
noneQuality100 %Both extractors agreed
—Thresher
Show verbatim quote (Section b / Table 3)
Nilai dari Performance Efficiency dari mesin thresher sekitar 0% s/d 100% dengan rata-rata nilai Performance Efficiency sebesar 99,99%.
nonePerformance100.0 %Both extractors agreed
—Thresher
Show verbatim quote (Section a / Table 2)
Selama periode pengambilan data selama 2 bulan diperoleh nilai Availability dari mesin thresher sekitar 0% s.d 91,66% dengan rata-rata nilai Availability sebesar 88,61%.
noneAvailability88.6 %Both extractors agreed
—Thresher
Show verbatim quote (Section d / Table 5)
Hasil dari overall equipment effectiviness (oee) yang berkisar antara 0% s/d 91,66%, dengan rata-rata nilai oee adalah 88,61%.
noneOEE88.6 %Both extractors agreed

Observation units

  • Thresher · Separation (centrifugation, filtration, membranes) · Baseline