foratvise
Get Started
Process defects (scrap and rework)

Unwanted crystallization in cooked product

Process defects (scrap and rework)QualityCooking and frying

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 57 studies that could observe it (sparse evidence).

What happens

During cooking or concentration of sugar- or solute-rich mixtures, local supersaturation combined with seeding nuclei, temperature fluctuations, excessive agitation shear, or prolonged holding time triggers premature or uncontrolled crystal nucleation and growth within the mass. The resulting crystalline structure produces a grainy texture, cloudiness, or hardened deposits that fail the sensory or physical specification at first-pass inspection.

What is done about it

Tighten control of cooking temperature, concentration (Brix) and cooling/holding profile through closed-loop recipe management, and minimize mechanical disturbance or seeding contamination during the critical supersaturation phase. Standardize cleaning of contact surfaces to remove residual crystal nuclei between batches and validate the process window with in-line Brix or refractometer feedback.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.1–2.3%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
48% [36–59%]
Studies / units
57 / 69
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.6%]5 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–3.6%]1 study
  • Brewing, wine and spirits
    0.9% [0.1–3.8%]0 studies
  • Bakery and pasta
    1.1% [0.1–3.8%]24 studies
  • Meat, poultry and seafood
    1.0% [0.1–4.0%]2 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.6%]2 studies
  • Grain and oilseed milling
    0.9% [0.1–3.8%]0 studies
  • Sugar and confectionery
    0.9% [0.1–3.3%]8 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.4%]4 studies
  • Animal feed and pet food
    0.9% [0.1–3.5%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.3%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

During cooking or concentration of sugar- or solute-rich mixtures, local supersaturation combined with seeding nuclei, temperature fluctuations, excessive agitation shear, or prolonged holding time triggers premature or uncontrolled crystal nucleation and growth within the mass. The resulting crystalline structure produces a grainy texture, cloudiness, or hardened deposits that fail the sensory or physical specification at first-pass inspection.

How it looks in SCADA data

Engineering guidance

Batch trend logs show the cooking temperature or Brix/refractive-index setpoint drifting outside the controlled band, or holding time at a given temperature extending beyond the normal process window, without a corresponding equipment fault alarm. Quality or lab-entry systems record an elevated rate of texture/appearance rejects or downgrades tied to specific batch IDs, while the machine state itself remains in normal run mode throughout the event.

Countermeasure

Engineering guidance

Tighten control of cooking temperature, concentration (Brix) and cooling/holding profile through closed-loop recipe management, and minimize mechanical disturbance or seeding contamination during the critical supersaturation phase. Standardize cleaning of contact surfaces to remove residual crystal nuclei between batches and validate the process window with in-line Brix or refractometer feedback.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 28.0 % · as reported: “crystal”
    Show verbatim quote
    Pada 1.193 defect yang terklasifikasi, crystal merupakan kategori terbesar (28,0%).