foratvise
Get Started
Equipment failure (breakdowns)

Bottle washer drive/gearbox failure

Equipment failure (breakdowns)AvailabilityContainer washing and rinsing

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 80 studies that could observe it (sparse evidence).

What happens

The gearbox and drive train that rotate the bottle washing machine's carrier chain or basket wheel suffer wear, lubrication loss, bearing degradation or tooth breakage under continuous cyclic load and exposure to moisture and caustic residues. Progressive wear culminates in jamming, excessive backlash, overheating or sudden shaft/gear failure that stops the washer's indexing motion.

What is done about it

Implement condition-based maintenance on the gearbox and drive components, including periodic lubrication, vibration and oil analysis, and scheduled replacement of wear parts such as bearings, seals and gear sets before failure. Protect the drive with torque limiters or shear pins and ensure proper sealing against washer moisture and chemical ingress.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–2.0%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
57% [47–67%]
Studies / units
80 / 102
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–3.1%]10 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.2%]27 studies
  • Brewing, wine and spirits
    1.1% [0.1–3.9%]12 studies
  • Bakery and pasta
    0.9% [0.1–3.4%]0 studies
  • Meat, poultry and seafood
    0.8% [0.1–3.1%]4 studies
  • Fruit and vegetable processing
    0.8% [0.1–3.2%]4 studies
  • Grain and oilseed milling
    0.9% [0.1–3.2%]3 studies
  • Sugar and confectionery
    0.8% [0.1–3.1%]3 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–3.2%]4 studies
  • Animal feed and pet food
    0.8% [0.1–3.2%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–3.2%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The gearbox and drive train that rotate the bottle washing machine's carrier chain or basket wheel suffer wear, lubrication loss, bearing degradation or tooth breakage under continuous cyclic load and exposure to moisture and caustic residues. Progressive wear culminates in jamming, excessive backlash, overheating or sudden shaft/gear failure that stops the washer's indexing motion.

How it looks in SCADA data

Engineering guidance

SCADA/MES shows an unplanned stop state on the bottle washing machine with drive motor overload, high current draw or torque alarm preceding the fault, often with a maintenance fault code referencing gearbox, drive or motor. Upstream filler/depalletizer accumulation and downstream starvation of the filling line are visible around the stop, and repeated short-duration jams may precede the final breakdown event.

Countermeasure

Engineering guidance

Implement condition-based maintenance on the gearbox and drive components, including periodic lubrication, vibration and oil analysis, and scheduled replacement of wear parts such as bearings, seals and gear sets before failure. Protect the drive with torque limiters or shear pins and ensure proper sealing against washer moisture and chemical ingress.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 210 min · as reported: “gear box machine”
    Show verbatim quote
    gear box machine 4 210 312 7514 98.11 90.27
  2. Number of events: 4.00 events · as reported: “gear box machine”
    Show verbatim quote
    gear box machine 4 210 312 7514 98.11 90.27
  3. Lost time: 560 min · as reported: “BWM”
    Show verbatim quote
    Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
  4. Number of events: 22.0 events · as reported: “BWM”
    Show verbatim quote
    Total 61 21 24 22 17 7 11 10 8 181