Nylon washer/seal wear and failure
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
A small nylon washer or sealing ring used in the filling valve, nozzle or dosing mechanism gradually wears, deforms or cracks under repeated mechanical cycling and contact with product or cleaning agents. Once the washer loses its sealing or cushioning function, the valve or filling head no longer closes, aligns or doses correctly, producing leaks, misalignment or jamming that stops the equipment until the part is replaced.
What is done about it
Establish a preventive replacement schedule for nylon washers and seals based on cycle count or condition inspection rather than waiting for failure, and keep spares readily available at the line. Evaluate upgrading to a more wear-resistant or chemically compatible elastomer or composite material to extend service life.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.7%]
- Share of lost time when present
- 58% [46–68%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.7%]18 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.3%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.6%]16 studies
- Bakery and pasta0.5% [0.0–1.9%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.8%]6 studies
- Fruit and vegetable processing0.5% [0.0–1.8%]4 studies
- Grain and oilseed milling0.5% [0.0–1.9%]6 studies
- Sugar and confectionery0.5% [0.0–1.8%]3 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.8%]6 studies
- Animal feed and pet food0.5% [0.0–1.9%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.7%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA small nylon washer or sealing ring used in the filling valve, nozzle or dosing mechanism gradually wears, deforms or cracks under repeated mechanical cycling and contact with product or cleaning agents. Once the washer loses its sealing or cushioning function, the valve or filling head no longer closes, aligns or doses correctly, producing leaks, misalignment or jamming that stops the equipment until the part is replaced.
How it looks in SCADA data
Engineering guidanceAppears as unplanned stop events on the filler logged against a specific filling head or valve, often preceded by intermittent dosing or leak alarms before the full stop. Maintenance/work-order records reference washer or seal replacement, and the stop duration is consistent with a manual mechanical repair rather than a jam clearance.
Countermeasure
Engineering guidanceEstablish a preventive replacement schedule for nylon washers and seals based on cycle count or condition inspection rather than waiting for failure, and keep spares readily available at the line. Evaluate upgrading to a more wear-resistant or chemically compatible elastomer or composite material to extend service life.
4Sources
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Open sourceTime between events: 23,756 not reported · as reported: “Nilon Y Wasner”
Show verbatim quote
Waktu Kerusakan Weibull MTTF 23756
- Application of the Concept of Total Productive Maintenance in Automatic Bottle Filling Machines (2019)Open sourceMean event duration: 107 not reported · as reported: “Nilon Y Wasner”
Show verbatim quote
Waktu Perbaikan Weibull MTTR 107

