foratvise
Get Started
Equipment failure (breakdowns)

Wrapping machine component failure

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

Individual mechanical subsystems of the wrapping machine, such as the cutting blade, the ear-folding mechanism, the cap closer, the paper feed unit, the size/gauge adjustment, or the cooling drum, wear out, lose alignment or lose their set point, so the machine can no longer form, close or cool the wrapped unit correctly and the line stops until the part is repaired or readjusted. Because several independent subsystems can fail in this way, the equipment experiences recurring unplanned stoppages even though the root cause differs each time.

What is done about it

Implement subsystem-specific preventive maintenance such as scheduled blade sharpening or replacement, periodic inspection and lubrication of the flap and cap mechanisms, calibration checks on the paper feed and size adjustment, and monitoring of the cooling drum temperature, supported by condition monitoring to detect drift before failure. Keep critical spare parts for each subsystem available to shorten repair time when a failure does occur.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.6%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
58% [47–68%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.7% [0.1–2.4%]14 studies
  • Soft drinks, bottled water and juices
    0.6% [0.1–2.0%]33 studies
  • Brewing, wine and spirits
    0.7% [0.1–2.4%]14 studies
  • Bakery and pasta
    0.7% [0.1–2.5%]6 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.6%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.6%]4 studies
  • Grain and oilseed milling
    1.1% [0.1–4.2%]4 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]4 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.4%]8 studies
  • Animal feed and pet food
    0.7% [0.1–2.7%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.3%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Individual mechanical subsystems of the wrapping machine, such as the cutting blade, the ear-folding mechanism, the cap closer, the paper feed unit, the size/gauge adjustment, or the cooling drum, wear out, lose alignment or lose their set point, so the machine can no longer form, close or cool the wrapped unit correctly and the line stops until the part is repaired or readjusted. Because several independent subsystems can fail in this way, the equipment experiences recurring unplanned stoppages even though the root cause differs each time.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show short-to-medium unplanned downtime events tagged with distinct fault or alarm codes per subsystem (blade, feeder, flap mechanism, cap station, cooling unit), each with its own frequency and repair duration. The line state transitions to fault while upstream units show blocking and downstream units show starvation, and temperature or position sensors associated with the failed subsystem drift outside their normal band just before the stop.

Countermeasure

Engineering guidance

Implement subsystem-specific preventive maintenance such as scheduled blade sharpening or replacement, periodic inspection and lubrication of the flap and cap mechanisms, calibration checks on the paper feed and size adjustment, and monitoring of the cooling drum temperature, supported by condition monitoring to detect drift before failure. Keep critical spare parts for each subsystem available to shorten repair time when a failure does occur.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 105 events · as reported: “Kağıt alamama durumu”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  2. Number of events: 44.0 events · as reported: “Perfektörün soğutmaması”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  3. Number of events: 37.0 events · as reported: “Kulakçık arızası”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  4. Number of events: 25.0 events · as reported: “Bıçak arızası”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  5. Number of events: 23.0 events · as reported: “Granaj ayarının bozulması”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  6. Number of events: 17.0 events · as reported: “Kapak arızası”
    Show verbatim quote
    Arıza Sayısına Göre Pareto Diyagramı 105 44 37 25 23 17 15 161 0 50 100 150 200 3 6 5 1 2 4 7 8
  7. Lost time: 4,727 min · as reported: “Kağıt alamama durumu”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  8. Lost time: 2,495 min · as reported: “Kulakçık arızası”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  9. Lost time: 2,249 min · as reported: “Bıçak arızası”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  10. Lost time: 2,246 min · as reported: “Perfektörün soğutmaması”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  11. Lost time: 1,408 min · as reported: “Granaj ayarının bozulması”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8
  12. Lost time: 638 min · as reported: “Kapak arızası”
    Show verbatim quote
    Arıza Süresine Göre Pareto Diyagramı 4727 2495 2249 2246 1408 943 638 10768 0 2000 4000 6000 8000 10000 12000 3 5 1 6 2 7 4 8