foratvise
Get Started
Included study

PERENCANAAN TOTAL PRODUCTIVE MAINTENANCE(TPM) UNTUK MENINGKATKAN PRODUKTIVITAS STASIUN GILINGAN PADA PG KEBON AGUNG

Open source

1Bibliographic record

Authors
Mochammad Harits Trysnawan Amaanullah, Rina Sandora, Pranowo Sidi
Year
2017
Venue
Seminar K3
DOI
—
Country
Indonesia
Segment
Sugar and confectionery
Process family
Milling, extraction and separation
Study type
Single case study
Extraction scope
Abstract only
Size
1 plants · 1 lines · — machines
Observation period
510 days
Data collection
not_reported
Intervention
Show the setting as described by the study
PG Kebon Agung has 15.000 TCD set milling capacity and 12.500 TCD effective milling capacity.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 7High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
machinery damage (breakdown)milling station
Show verbatim quote (abstract)
machinery damage leads to milling stops for about 766.61 hours which affect to a not optimum production process.
Equipment failure (breakdowns)Lost time767 hoursBoth extractors agreed
—milling station
Show verbatim quote (abstract)
OEE number on 2014-2016 ranged on 78.15% until 83.18%.
noneOEE78.2 %Single extractor
—milling station
Show verbatim quote (abstract)
OEE number on 2014-2016 ranged on 78.15% until 83.18%.
noneOEE83.2 %Single extractor

Observation units

  • Stasiun Gilingan (milling station) · Milling and grinding · Baseline