Included study
Total Productive Maintenance Model applying SMED and FMEA to increase the overall efficiency of equipment (OEE) in the food sector
1Bibliographic record
- Authors
- Ernesto Altamirano-Flores, Karen Caballero-Rojas, Oscar Palacios-Aguilar
- Year
- 2021
- Venue
- AHFE international
- Country
- Peru
- Segment
- Food manufacturing (unspecified or mixed)
- Process family
- Filling and packaging line
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · 2 machines
- Observation period
- 182 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
This case study will be carried out within the production process of sauces, whose production process is classified into two main sub-processes: manufactur-ing and packaging, which make up the entire production line.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 9Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events). | 2 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method. | 1 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Volpak 7Show verbatim quote (Figure 2 / Design of the validation section)there was a notable increase in the OEE of the Volpak 7, reaching 60% in the month of October. | none | OEE | 60.0 % | Both extractors agreed |
—Volpak 7Show verbatim quote (Initial diagnosis section)The availability represented the lowest rate of the OEE com-ponents with a value of 51.46% | none | Availability | 51.5 % | Both extractors agreed |
CIP wash stopCIP systemShow verbatim quote (Initial diagnosis section)The stop that represents the largest proportion is the CIP wash stop, which represents a stop time of approximately 16 hours. | Planned downtime (scheduled maintenance, breaks, no demand) | Lost time | 16.0 h | Adjudicated |
CIP wash stop (maximum recorded)CIP systemShow verbatim quote (Initial diagnosis section)the plant management recorded washing times that exceeded the planned one, occupying a maximum of 26 stop-page hours | Equipment failure (breakdowns) | Lost time | 26.0 h | Both extractors agreed |
—Volpak 7Show verbatim quote (Table 1)OEE (volpak 7) 45.37% 43.96% 41.67% | none | OEE | 45.4 % | Single extractor |
—Volpak 7Show verbatim quote (Table 1)OEE (volpak 7) 45.37% 43.96% 41.67% | none | OEE | 44.0 % | Single extractor |
—Volpak 7Show verbatim quote (Table 1)OEE (volpak 7) 45.37% 43.96% 41.67% | none | OEE | 41.7 % | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTTR (volpak 7) 2.63 4.41 3.75 | none | Time between events | 2.63 h | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTTR (volpak 7) 2.63 4.41 3.75 | none | Time between events | 4.41 h | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTTR (volpak 7) 2.63 4.41 3.75 | none | Time between events | 3.75 h | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTBF (volpak 7) 69.37 85.59 61.70 | none | Time between events | 69.4 h | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTBF (volpak 7) 69.37 85.59 61.70 | none | Time between events | 85.6 h | Single extractor |
—Volpak 7Show verbatim quote (Table 1)MTBF (volpak 7) 69.37 85.59 61.70 | none | Time between events | 61.7 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTTR (system CIP) 10.26 11.18 10.64 | none | Time between events | 10.3 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTTR (system CIP) 10.26 11.18 10.64 | none | Time between events | 11.2 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTTR (system CIP) 10.26 11.18 10.64 | none | Time between events | 10.6 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTBF (system CIP) 14.22 18.29 16 | none | Time between events | 14.2 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTBF (system CIP) 14.22 18.29 16 | none | Time between events | 18.3 h | Single extractor |
—CIP systemShow verbatim quote (Table 1)MTBF (system CIP) 14.22 18.29 16 | none | Time between events | 16.0 h | Single extractor |
Observation units
- Volpak 7 · Packaging (forming, sealing, wrapping, case packing, palletizing) · After intervention
- Volpak 7 · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
- CIP system · Cleaning in place (CIP) and sanitation · Baseline

