Included study
Optimizing Productivity in the Animal Feed Industry: A Lean Approach for Enhanced Efficiency and Quality Assurance
1Bibliographic record
- Authors
- Jenny Elizabeth Jaico-Carranza, Eduardo Manuel Olivos-Valdivia, Martin Fidel Collao-Diaz
- Year
- 2024
- Venue
- International Conference on Industrial Engineering and Operations Management (IEOM)
- Country
- Peru
- Segment
- Animal feed and pet food
- Process family
- Whole plant or unspecified
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · — machines
- Observation period
- —
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
The case study focused on a small and medium-sized enterprise dedicated to the production of balanced animal feed, located in southern Peru.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 8Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—Show verbatim quote (Section 5, Results and Discussion)cycle time was reduced by 47%, from 76.45 minutes per kilo to 40.56 minutes per kilo | none | Throughput | 40.6 minutes/Kg | Both extractors agreed |
—Show verbatim quote (Section 5, Results and Discussion)with an average production of 1.05 kg of animal feed per man-hour, compared to 0.78 kg per man-hour before the improvement was made | none | Throughput | 1.05 kg/man-h | Both extractors agreed |
—Show verbatim quote (Section 5, Results and Discussion)cycle time was reduced by 47%, from 76.45 minutes per kilo to 40.56 minutes per kilo | none | Throughput | 76.5 minutes/Kg | Both extractors agreed |
—Show verbatim quote (Section 5, Results and Discussion)with an average production of 1.05 kg of animal feed per man-hour, compared to 0.78 kg per man-hour before the improvement was made | none | Throughput | 0.780 kg/man-h | Both extractors agreed |
Line preparation time (changeover)Show verbatim quote (Table 1)Line preparation time (seconds) SMED 524.92 140 140.36 -73% | Setup and adjustments | Lost time | 525 seconds | Single extractor |
Line preparation time (changeover)Show verbatim quote (Table 1)Line preparation time (seconds) SMED 524.92 140 140.36 -73% | Setup and adjustments | Lost time | 140 seconds | Single extractor |
—Show verbatim quote (Table 1, page 663)Line preparation time (seconds) | SMED | 524.92 | 140 | 140.36 | -73% | Setup and adjustments | Mean event duration | 525 seconds | Single extractor |
—Show verbatim quote (Table 1, page 663)Production program compliance rate (%) | Heijunka | 45.64% | 95% | 90.56% | 98% | none | Performance | 45.6 % | Single extractor |
—Show verbatim quote (Table 1, page 663)Line preparation time (seconds) | SMED | 524.92 | 140 | 140.36 | -73% | Setup and adjustments | Mean event duration | 140 seconds | Single extractor |
—Show verbatim quote (Table 1, page 663)Production program compliance rate (%) | Heijunka | 45.64% | 95% | 90.56% | 98% | none | Performance | 90.6 % | Single extractor |
Observation units
- Production line (Results / post-intervention) · Whole line or unspecified equipment · After intervention
- Production line (As Is / baseline) · Whole line or unspecified equipment · Baseline
- Whole plant · Whole line or unspecified equipment · Baseline
- Whole plant · Whole line or unspecified equipment · After intervention

