Included study
Industrial Food Process Improvement by Waste Minimization in Pasta Packaging Using DMAIC Methodology
1Bibliographic record
- Authors
- Svetlana Dabić-Miletić
- Year
- 2025
- Venue
- Journal of Industrial Intelligence
- Country
- —
- Segment
- Bakery and pasta
- Process family
- Filling and packaging line
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 5 lines · — machines
- Observation period
- 7 days
- Data collection
- not_reported
- Intervention
Show the setting as described by the study
In a pasta production facility, a significant issue was identified during the packaging stage related to excessive raw packaging material usage due to overfilling.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 6High risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Interviews, estimates, or method not reported. | 0 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown. | 0 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%. | 0 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
overfilling; package weight exceeds tolerance specificationShow verbatim quote (Section 5.1, Measurement (Measure phase))the average weight per package is 512 g, with a standard deviation of 8 g, which significantly exceeds the allowed tolerance of ±5 g | Process defects (scrap and rework) | Quality | 512 g | Single extractor |
high weight variation in packagesShow verbatim quote (Section 5.1, Measurement (Measure phase))the average weight per package is 512 g, with a standard deviation of 8 g | Process defects (scrap and rework) | Quality | 8.00 g | Single extractor |
overfilling; package weight exceeds tolerance specification (reduced)Show verbatim quote (Section 5.1, Improvement (Improve phase))the average weight per package was reduced to 499 g, with a standard deviation of 3 g | Process defects (scrap and rework) | Quality | 499 g | Single extractor |
high weight variation in packages (reduced)Show verbatim quote (Section 5.1, Improvement (Improve phase))the average weight per package was reduced to 499 g, with a standard deviation of 3 g | Process defects (scrap and rework) | Quality | 3.00 g | Single extractor |
raw material waste from overfillingShow verbatim quote (Section 5.1, Improvement (Improve phase))Raw material waste was reduced by 27%, which led to savings of EUR 4,200 per month. | Process defects (scrap and rework) | Defect rate | 27.0 % | Single extractor |
Observation units
- Packaging lines 1-5 · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
- Packaging lines 1-5 · Packaging (forming, sealing, wrapping, case packing, palletizing) · After intervention

