foratvise
Get Started
Process defects (scrap and rework)

Package fill weight deviation (variation/overfilling)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

Dosing or filling mechanisms drift out of calibration, or product density and flow characteristics vary, causing the delivered weight per package to spread widely around the target or to systematically exceed the tolerance band, producing underweight/overweight or giveaway packages even while the line runs under otherwise stable conditions.

What is done about it

Recalibrate and perform preventive maintenance on dosing/filling valves, pumps or auger heads, verify product density and temperature control, and tighten statistical process control limits with periodic sampling and automatic feedback correction to the filler setpoints.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.6%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
48% [37–60%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.9%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    1.0% [0.1–3.7%]6 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.7%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.4%]4 studies
  • Sugar and confectionery
    0.7% [0.1–2.5%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]8 studies
  • Animal feed and pet food
    0.7% [0.1–2.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Dosing or filling mechanisms drift out of calibration, or product density and flow characteristics vary, causing the delivered weight per package to spread widely around the target or to systematically exceed the tolerance band, producing underweight/overweight or giveaway packages even while the line runs under otherwise stable conditions.

How it looks in SCADA data

Engineering guidance

Checkweigher or in-line scale data show increased standard deviation or a mean shift of net weight readings away from target, with rising counts of over-tolerance and under-tolerance rejects while machine run state remains normal; no stoppage or speed-loss signals accompany the trend.

Countermeasure

Engineering guidance

Recalibrate and perform preventive maintenance on dosing/filling valves, pumps or auger heads, verify product density and temperature control, and tighten statistical process control limits with periodic sampling and automatic feedback correction to the filler setpoints.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Quality: 512 g · as reported: “overfilling; package weight exceeds tolerance specification”
    Show verbatim quote
    the average weight per package is 512 g, with a standard deviation of 8 g, which significantly exceeds the allowed tolerance of ±5 g
  2. Quality: 8.00 g · as reported: “high weight variation in packages”
    Show verbatim quote
    the average weight per package is 512 g, with a standard deviation of 8 g
  3. Quality: 499 g · as reported: “overfilling; package weight exceeds tolerance specification (reduced)”
    Show verbatim quote
    the average weight per package was reduced to 499 g, with a standard deviation of 3 g
  4. Quality: 3.00 g · as reported: “high weight variation in packages (reduced)”
    Show verbatim quote
    the average weight per package was reduced to 499 g, with a standard deviation of 3 g
  5. Defect rate: 27.0 % · as reported: “raw material waste from overfilling”
    Show verbatim quote
    Raw material waste was reduced by 27%, which led to savings of EUR 4,200 per month.