Included study
Analisis Losses Minyak Sawit pada Proses Pengolahan Pabrik Kelapa Sawit PT Perkebunan Nusantara IV Regional IV Unit Usaha PKS Bunut
1Bibliographic record
- Authors
- Farhan Al rasyid Nasution, Brav Deva Bernadhi
- Year
- 2026
- Venue
- Journal of Science Technology and Innovation
- Country
- Indonesia
- Segment
- Grain and oilseed milling
- Process family
- Slaughter, cutting and primary processing
- Study type
- Single case study
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · — machines
- Observation period
- 30 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
Observasi dilakukan pada seluruh stasiun pengolahan, meliputi penerimaan bahan baku, sterilizer, thresher, digester dan screw press, klarifikasi, hingga stasiun kernel, dengan fokus pada pengukuran losses pada unstripped fruit (USF), janjang kosong, nut, ampas press, sludge, dan solid decanter.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 10Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration. | 1 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
USF (unstripped fruit)Show verbatim quote (Hasil dan Pembahasan / Tabel 1)Nilai rata-rata losses USF selama periode pengamatan tercatat sebesar 0,04%, sedangkan batas norma industri berada pada nilai 0,09%. | Process defects (scrap and rework) | Defect rate | 0.0400 % | Single extractor |
Janjangan kosongShow verbatim quote (Hasil dan Pembahasan / Tabel 1)Evaluasi terhadap janjang kosong memperlihatkan bahwa rata-rata losses berada pada nilai 0,37% dengan batas norma maksimum sebesar 0,44%. | Process defects (scrap and rework) | Defect rate | 0.370 % | Single extractor |
NutShow verbatim quote (Tabel 1. Rata-rata Losses pada Stasiun Perebusan dan Perontokan PKS Bunut)Nut 0,09 0,10 Mendekati batas | Process defects (scrap and rework) | Defect rate | 0.0900 % | Single extractor |
—Show verbatim quote (Tabel 1. Rata-rata Losses pada Stasiun Perebusan dan Perontokan PKS Bunut)Total losses awal proses 0,50 0,63 Stabil | Process defects (scrap and rework) | Defect rate | 0.500 % | Single extractor |
Observation units
- Stasiun Perebusan dan Perontokan PKS Bunut · Sterilization (retort, UHT) · Baseline

