foratvise
Get Started
Included study

Maintenance System Analysis Using the Total Productive Maintenance (TPM) Method

Open source

1Bibliographic record

Authors
Yusril Ananta, Bayu Ilham Pradana
Year
2025
Venue
Jurnal Management Risiko dan Keuangan
DOI
—
Country
Indonesia
Segment
Sugar and confectionery
Process family
Milling, extraction and separation
Study type
Single case study
Extraction scope
Abstract only
Size
1 plants · 1 lines · — machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
This study aims to analyze the maintenance system of the mill station at PG Krebet Baru Unit of PT PG Rajawali I, evaluate its effectiveness, and provide recommendations for improving machinery and production equipment maintenance based on the Total Productive Maintenance (TPM) method.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 5High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—mill station
Show verbatim quote (Abstract)
The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%.
noneQuality99.4 %Both extractors agreed
—mill station
Show verbatim quote (Abstract)
The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%.
nonePerformance100.0 %Both extractors agreed
—mill station
Show verbatim quote (Abstract)
The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%.
noneAvailability99.2 %Both extractors agreed
—mill station
Show verbatim quote (Abstract)
The OEE value reached 98.53%, with availability at 99.17%, performance efficiency at 99.97%, and quality rate at 99.38%.
noneOEE98.5 %Both extractors agreed
reduced speed lossesmill station
Show verbatim quote (Abstract)
The Six Big Losses analysis indicates that the largest loss is reduced speed losses at 6.9%.
Reduced speedShare of lost time6.90 %Both extractors agreed

Observation units

  • Mill station · Milling and grinding · Baseline