foratvise
Get Started
Included study

Robust DMAIC-Driven Optimization of Expansion Index in Cereal Extrusion Using DOE and SHAP-Based Factor Screening

Open source

1Bibliographic record

Authors
Ángel Geovanny Guamán Lozano, Julio César Moyano Alulema, Jhofre Ramiro Guamán Quishpi
Year
2026
Venue
Industrial Engineering & Management Systems
Country
—
Segment
Snacks, coffee, tea and other foods
Process family
Forming, baking and cooking
Study type
Before/after intervention
Extraction scope
Abstract only
Size
1 plants · 1 lines · — machines
Observation period
—
Data collection
not_reported
Intervention
Show the setting as described by the study
This study presents a DMAIC-driven framework to reduce variability and improve control of the Expansion Index(EI) in an industrial cereal extrusion line by integrating statistical experimentation with SHAP-based factor screening.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 5High risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period not reported.0 / 2
How were loss data collected?Interviews, estimates, or method not reported.0 / 2
Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers.0 / 2
Does the loss breakdown account for the total loss it claims to explain?Only selected causes are reported and the total is unknown.0 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked.1 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—cereal extrusion line
Show verbatim quote (abstract)
A baseline diagnosis from 203 EI observations showed an incapable process, with 597545.45 PPM out of specification, Ppk = 0.13, and instability in X̄ –S control charts.
Process defects (scrap and rework)Defect rate597,545 PPMSingle extractor
unplanned downtimecereal extrusion line
Show verbatim quote (abstract)
unplanned downtime decreasing from 600 to 300 min/week
Not classifiable from the reportLost time600 min/weekSingle extractor
—cereal extrusion line
Show verbatim quote (abstract)
Post-improvement verification confirmed reduced variability, with standard deviation decreasing from 0.3544 to 0.06126, nonconformities falling to 17699.86 PPM, and unplanned downtime decreasing from 600 to 300 min/week.
Process defects (scrap and rework)Defect rate17,700 PPMSingle extractor
unplanned downtimecereal extrusion line
Show verbatim quote (abstract)
unplanned downtime decreasing from 600 to 300 min/week
Not classifiable from the reportLost time300 min/weekSingle extractor

Observation units

  • Industrial cereal extrusion line · Extrusion · Baseline
  • Industrial cereal extrusion line · Extrusion · After intervention