Eingeschlossene Studie
Optimizing beverage manufacturing: integrating lean manufacturing and machine learning to enhance efficiency and reduce waste
1Bibliografische Angaben
- Autoren
- Mendoza Sotomayor, Raul, Sabogal Arias, Jose Antonio
- Jahr
- 2025
- Publikationsorgan
- —
- DOI
- —
- Land
- Peru
- Segment
- Bier, Wein und Spirituosen
- Prozessfamilie
- Abfüll- und Verpackungslinie
- Studientyp
- Vorher-nachher-Intervention
- Extraktionsumfang
- Volltext
- Umfang
- 1 Werke · 1 Linien · 5 Maschinen
- Beobachtungszeitraum
- —
- Datenerhebung
- manual_logs
- Intervention
Umfeld laut Studie anzeigen
The main issues concerning the product process include 25% of incorrectly labeled bottles, 18% of improperly sealed bottles, and 12% of reprocessing in the current alcoholic beverage production process.
2Verzerrungsrisiko
Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 10Mittleres Risiko
| Kriterium | Punkte |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described. | 1 / 2 |
| Is the observation period long enough and reported?Period not reported. | 0 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?No definition; metrics are reported as bare numbers. | 0 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance. | 2 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Recomputed totals, shares and OEE factors agree with the reported values within 2 percentage points. | 2 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extrahierte Daten
Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
| Berichtete Ursache | Verlustkategorie | Kennzahl | Wert | Extraktion |
|---|---|---|---|---|
Improperly sealed bottlescapping machineWörtliches Zitat anzeigen (Table 7. Results of defects)Improperly sealed bottles Average 11 7 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 7,00 Boxes x 12 | Beide Extraktionen übereinstimmend |
Improperly sealed bottlescapping machineWörtliches Zitat anzeigen (Table 7. Results of defects)Improperly sealed bottles Average 11 7 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 11,0 Boxes x 12 | Beide Extraktionen übereinstimmend |
Mislabelinglabeling machineWörtliches Zitat anzeigen (Table 7. Results of defects)Mislabeling Average 15 8 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 8,00 Boxes x 12 | Beide Extraktionen übereinstimmend |
Mislabelinglabeling machineWörtliches Zitat anzeigen (Table 7. Results of defects)Mislabeling Average 15 8 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 15,0 Boxes x 12 | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 9. Results of unimproved process vs. Improved process)Production Boxes x 12 60 80 | none | Durchsatz | 80,0 Boxes x 12 | Beide Extraktionen übereinstimmend |
—Wörtliches Zitat anzeigen (Table 9. Results of unimproved process vs. Improved process)Production Boxes x 12 60 80 | none | Durchsatz | 60,0 Boxes x 12 | Beide Extraktionen übereinstimmend |
ReworkWörtliches Zitat anzeigen (Table 7. Results of defects)Rework Average 7 4 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 4,00 Boxes x 12 | Beide Extraktionen übereinstimmend |
ReworkWörtliches Zitat anzeigen (Table 7. Results of defects)Rework Average 7 4 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 7,00 Boxes x 12 | Beide Extraktionen übereinstimmend |
—mixing machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 315 SEC TCP= 30 MIN TF= 100% PNC= 8% TD= 25200 SEC/DAY | Rüsten und Einstellen | Verlustzeit | 30,0 MIN | Einfache Extraktion |
—mixing machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 315 SEC TCP= 30 MIN TF= 100% PNC= 8% TD= 25200 SEC/DAY | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 8,00 % | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 293 SEC TCP= 10 MIN TF= 75% PNC= 12% TD= 25200 SEC/DAY | Rüsten und Einstellen | Verlustzeit | 10,0 MIN | Einfache Extraktion |
—filling machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 293 SEC TCP= 10 MIN TF= 75% PNC= 12% TD= 25200 SEC/DAY | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 12,0 % | Einfache Extraktion |
—capping machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 376 SEC TCP= 10 MIN TF= 90% PNC= 15% TD= 25200 SEC/DAY | Rüsten und Einstellen | Verlustzeit | 10,0 MIN | Einfache Extraktion |
—capping machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 376 SEC TCP= 10 MIN TF= 90% PNC= 15% TD= 25200 SEC/DAY | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 15,0 % | Einfache Extraktion |
—labeling machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 336 SEC TCP= 10 MIN TF= 80% PNC= 20% TD= 25200 SEC/DAY | Rüsten und Einstellen | Verlustzeit | 10,0 MIN | Einfache Extraktion |
—labeling machineWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 336 SEC TCP= 10 MIN TF= 80% PNC= 20% TD= 25200 SEC/DAY | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 20,0 % | Einfache Extraktion |
Line change timelabeling machineWörtliches Zitat anzeigen (Table 8. Change times results)Line change time Average 42 16 | Rüsten und Einstellen | Mittlere Ereignisdauer | 42,0 min | Einfache Extraktion |
Line change timelabeling machineWörtliches Zitat anzeigen (Table 8. Change times results)Line change time Average 42 16 | Rüsten und Einstellen | Mittlere Ereignisdauer | 16,0 min | Einfache Extraktion |
—packing stationWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 420 SEC TCP= 1 MIN TF= 100% PNC= 0% TD= 25200 SEC/DAY | Rüsten und Einstellen | Verlustzeit | 1,00 MIN | Einfache Extraktion |
—packing stationWörtliches Zitat anzeigen (Figure 4 VSM of the company)TC= 420 SEC TCP= 1 MIN TF= 100% PNC= 0% TD= 25200 SEC/DAY | Prozessfehler (Ausschuss und Nacharbeit) | Fehlerquote | 0 % | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 9. Results of unimproved process vs. Improved process)Defects During production Boxes x 12 33 19 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 33,0 Boxes x 12 | Einfache Extraktion |
—Wörtliches Zitat anzeigen (Table 9. Results of unimproved process vs. Improved process)Defects During production Boxes x 12 33 19 | Prozessfehler (Ausschuss und Nacharbeit) | Anzahl der Ereignisse | 19,0 Boxes x 12 | Einfache Extraktion |
Line changeoverlabeling machineWörtliches Zitat anzeigen (Table 8)Line change time | Average | 42 | 16 | Rüsten und Einstellen | Verlustzeit | 42,0 min | Einfache Extraktion |
Line changeoverlabeling machineWörtliches Zitat anzeigen (Table 8)Line change time | Average | 42 | 16 | Rüsten und Einstellen | Verlustzeit | 16,0 min | Einfache Extraktion |
Beobachtungseinheiten
- RTD beverage production line · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention
- RTD beverage production line · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Mixing station · Mischen und Vermengen · Ausgangslage
- Filling station · Abfüllen · Ausgangslage
- Capping station · Verschließen und Falzen · Ausgangslage
- Labeling machine · Etikettieren und Kennzeichnen · Ausgangslage
- Labeling machine · Etikettieren und Kennzeichnen · Nach der Intervention
- Packing station · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage
- Beverage production line (baseline) · Gesamte Linie oder nicht spezifizierte Anlage · Ausgangslage
- Beverage production line (post-intervention) · Gesamte Linie oder nicht spezifizierte Anlage · Nach der Intervention

