foratvise
Loslegen
Eingeschlossene Studie

Aggregate Analysis of Packaging Machine Effectiveness Using the OEE Method at PT. XYZ

Quelle öffnen

1Bibliografische Angaben

Autoren
Satria Bagus Aji, Siti Nurhayati Ning Rahayu, Adi Fitra, Syarah Rizkia Feriaty, Tri Ngudi Wiyatno
Jahr
2025
Publikationsorgan
Jurnal Teknologi Terapan G-Tech
Land
Indonesia
Segment
Lebensmittelherstellung (nicht spezifiziert oder gemischt)
Prozessfamilie
Abfüll- und Verpackungslinie
Studientyp
Einzelfallstudie
Extraktionsumfang
Volltext
Umfang
1 Werke · 1 Linien · 10 Maschinen
Beobachtungszeitraum
92 Tage
Datenerhebung
manual_logs
Intervention
Umfeld laut Studie anzeigen
This study aims to analyze the effectiveness of ten CBP product packaging machines at PT. XYZ using the Overall Equipment Effectiveness (OEE) method.

2Verzerrungsrisiko

Bewertet nach dem Schema des Protokolls: 2 geringe Bedenken, 1 einige Bedenken, 0 hohe Bedenken.
Gesamtpunktzahl 12Mittleres Risiko
KriteriumPunkte
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product or sector is given but the equipment or process is only partly described.1 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?Formulae or definitions are given for the reported metrics, including what counts as planned time.2 / 2
Does the loss breakdown account for the total loss it claims to explain?The reported causes or categories sum to at least 90% of the stated total, or an explicit "other" class closes the balance.2 / 2
Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method.2 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result.2 / 2

3Extrahierte Daten

Jeder Datenpunkt mit seiner Einordnung und dem wörtlichen Zitat, das ihn belegt.
Berichtete UrsacheVerlustkategorieKennzahlWertExtraktion
imprecise timing belts, improper timing belt fit, and broken timing beltstiming belt
Wörtliches Zitat anzeigen (Fishbone Diagram section (Machine))
These issues contribute to downtime with a total of 5663 minutes and a frequency of 1171 occurrences.
Anlagenausfall (Störungen)Anzahl der Ereignisse1.171 occurrencesBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
The Availability ratio averaged 91%, the Performance ratio 94.77%, and the Quality ratio 95%.
noneQualität95,0 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
The Availability ratio averaged 91%, the Performance ratio 94.77%, and the Quality ratio 95%.
noneLeistung94,8 %Beide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
The Availability ratio averaged 91%, the Performance ratio 94.77%, and the Quality ratio 95%.
noneVerfügbarkeit91,0 %Beide Extraktionen übereinstimmend
sticky labels, jammed labels, labels too short or too long, and labels getting caughtlabel applicator
Wörtliches Zitat anzeigen (Fishbone Diagram section (Material))
These problems have caused downtime from October to December 2023, with a total downtime of 6448 minutes and a frequency of 1595 occurrences.
Anlagenausfall (Störungen)Anzahl der Ereignisse1.595 occurrencesBeide Extraktionen übereinstimmend
—
Wörtliches Zitat anzeigen (Conclusion)
The research results show that the average Overall Equipment Effectiveness (OEE) value of the ten CBP product packaging machines at PT. XYZ from October to December 2023 is 94%, which exceeds the world-class standard of 85%.
noneOEE94,0 %Beide Extraktionen übereinstimmend
sticky labels, jammed labels, labels too short or too long, and labels getting caughtlabel applicator
Wörtliches Zitat anzeigen (Fishbone Diagram section (Material))
These problems have caused downtime from October to December 2023, with a total downtime of 6448 minutes and a frequency of 1595 occurrences.
Anlagenausfall (Störungen)Verlustzeit6.448 minutesBeide Extraktionen übereinstimmend
bucket errors, RCU errors, and thermocouple cable failures caused by overheating, leading to seal leaksscale bucket / RCU / thermocouple
Wörtliches Zitat anzeigen (Fishbone Diagram section (Man))
These issues have contributed a total of 19,425 minutes of downtime with 4524 occurrences from October to December 2023.
Anlagenausfall (Störungen)Anzahl der Ereignisse4.524 occurrencesBeide Extraktionen übereinstimmend
imprecise timing belts, improper timing belt fit, and broken timing beltstiming belt
Wörtliches Zitat anzeigen (Fishbone Diagram section (Machine))
These issues contribute to downtime with a total of 5663 minutes and a frequency of 1171 occurrences.
Anlagenausfall (Störungen)Verlustzeit5.663 minutesBeide Extraktionen übereinstimmend
worn knives due to prolonged use, such as broken, misaligned, or jammed knivesknife
Wörtliches Zitat anzeigen (Fishbone Diagram section (Machine))
issues with worn knives due to prolonged use, such as broken, misaligned, or jammed knives, have caused downtime for the machines, contributing 1462 minutes of downtime and 131 occurrences.
Anlagenausfall (Störungen)Anzahl der Ereignisse131 occurrencesBeide Extraktionen übereinstimmend
worn knives due to prolonged use, such as broken, misaligned, or jammed knivesknife
Wörtliches Zitat anzeigen (Fishbone Diagram section (Machine))
issues with worn knives due to prolonged use, such as broken, misaligned, or jammed knives, have caused downtime for the machines, contributing 1462 minutes of downtime and 131 occurrences.
Anlagenausfall (Störungen)Verlustzeit1.462 minutesBeide Extraktionen übereinstimmend
bucket errors, RCU errors, and thermocouple cable failures caused by overheating, leading to seal leaksscale bucket / RCU / thermocouple
Wörtliches Zitat anzeigen (Fishbone Diagram section (Man))
These issues have contributed a total of 19,425 minutes of downtime with 4524 occurrences from October to December 2023.
Anlagenausfall (Störungen)Verlustzeit19.425 minutesBeide Extraktionen übereinstimmend
Equipment Failure Losses
Wörtliches Zitat anzeigen (Table 8)
Equipment Failure Losses 20.205 20.205 50% 50%
Anlagenausfall (Störungen)Anteil an der Verlustzeit50,0 %Beide Extraktionen übereinstimmend
Equipment Failure Losses
Wörtliches Zitat anzeigen (Table 8)
Equipment Failure Losses 20.205 20.205 50% 50%
Anlagenausfall (Störungen)Verlustzeit20.205 MinutesBeide Extraktionen übereinstimmend
Setup and Adjusments Losses
Wörtliches Zitat anzeigen (Table 8)
Setup and Adjusments Losses 2.425 40.410 6% 100%
Rüsten und EinstellenAnteil an der Verlustzeit6,00 %Beide Extraktionen übereinstimmend
Setup and Adjusments Losses
Wörtliches Zitat anzeigen (Table 8)
Setup and Adjusments Losses 2.425 40.410 6% 100%
Rüsten und EinstellenVerlustzeit2.425 MinutesBeide Extraktionen übereinstimmend
Reduced Speed Losses
Wörtliches Zitat anzeigen (Table 8)
Reduced Speed Losses 0 40.410 0% 100%
Verringerte GeschwindigkeitAnteil an der Verlustzeit0 %Beide Extraktionen übereinstimmend
Reduced Speed Losses
Wörtliches Zitat anzeigen (Table 8)
Reduced Speed Losses 0 40.410 0% 100%
Verringerte GeschwindigkeitVerlustzeit0 MinutesBeide Extraktionen übereinstimmend
Rework Losses
Wörtliches Zitat anzeigen (Table 8)
Rework Losses 8.890 29.095 22% 72%
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit22,0 %Beide Extraktionen übereinstimmend
Rework Losses
Wörtliches Zitat anzeigen (Table 8)
Rework Losses 8.890 29.095 22% 72%
Prozessfehler (Ausschuss und Nacharbeit)Verlustzeit8.890 MinutesBeide Extraktionen übereinstimmend
Defect Losses
Wörtliches Zitat anzeigen (Table 8)
Defect Losses 8.890 37.985 22% 94%
Prozessfehler (Ausschuss und Nacharbeit)Anteil an der Verlustzeit22,0 %Beide Extraktionen übereinstimmend
Defect Losses
Wörtliches Zitat anzeigen (Table 8)
Defect Losses 8.890 37.985 22% 94%
Prozessfehler (Ausschuss und Nacharbeit)Verlustzeit8.890 MinutesBeide Extraktionen übereinstimmend
Idling and Minor Stopages Losses
Wörtliches Zitat anzeigen (Table 8)
Idling and Minor Stopages Losses 0 40.410 0% 100%
Leerlauf und KurzstillständeVerlustzeit0 MinutesEinfache Extraktion
Idling and Minor Stopages Losses
Wörtliches Zitat anzeigen (Table 8)
Idling and Minor Stopages Losses 0 40.410 0% 100%
Leerlauf und KurzstillständeAnteil an der Verlustzeit0 %Einfache Extraktion

Beobachtungseinheiten

  • CBP product packaging machines (aggregate of 10 machines) · Verpacken (Formen, Siegeln, Einschlagen, Kartonieren, Palettieren) · Ausgangslage