Bag loading/opening mechanism failure
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
The automatic station that picks an empty bag from the magazine and opens its mouth before it is presented to the filling spout suffers a mechanical or pneumatic malfunction: grippers, suction cups, spreader fingers or clamping jaws fail to seize, align or fully open the bag. This causes the bag to be mispositioned, torn, folded or left unopened, so it cannot be transferred correctly to the filler and the station stops to clear the fault.
What is done about it
Apply preventive maintenance to grippers, suction cups and vacuum generators, keep spare mechanical parts for the opener station, and periodically calibrate the bag-presence and bag-open sensors. Standardize bag magazine loading and inspect incoming bag quality to reduce mechanical jams at the loader/opener.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.7%]
- Share of lost time when present
- 57% [46–67%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.6%]18 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.3%]44 studies
- Brewing, wine and spirits0.5% [0.0–1.8%]16 studies
- Bakery and pasta0.5% [0.0–1.9%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.7%]6 studies
- Fruit and vegetable processing0.5% [0.0–1.8%]4 studies
- Grain and oilseed milling0.5% [0.0–2.0%]6 studies
- Sugar and confectionery0.5% [0.0–1.9%]3 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.8%]6 studies
- Animal feed and pet food0.5% [0.0–1.9%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.7%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe automatic station that picks an empty bag from the magazine and opens its mouth before it is presented to the filling spout suffers a mechanical or pneumatic malfunction: grippers, suction cups, spreader fingers or clamping jaws fail to seize, align or fully open the bag. This causes the bag to be mispositioned, torn, folded or left unopened, so it cannot be transferred correctly to the filler and the station stops to clear the fault.
How it looks in SCADA data
Engineering guidanceEquipment-fault alarms tied to the bag-loader/opener station (gripper fault, vacuum low, open-sensor not confirmed) accompanied by a stopped machine state logged under the filling cell; photoeye or proximity-sensor signals for bag-present/bag-open toggle abnormally or time out, and the filler enters a starved state while the fault persists.
Countermeasure
Engineering guidanceApply preventive maintenance to grippers, suction cups and vacuum generators, keep spare mechanical parts for the opener station, and periodically calibrate the bag-presence and bag-open sensors. Standardize bag magazine loading and inspect incoming bag quality to reduce mechanical jams at the loader/opener.
4Sources
- Integration of Overall Equipment Effectiveness and Six Sigma Approach to Minimize Product Defect and Machine Downtime (2023)Open sourceNumber of events: 10.0 events · as reported: “Opening Bag”
Show verbatim quote
Opening Bag 10
- Integration of Overall Equipment Effectiveness and Six Sigma Approach to Minimize Product Defect and Machine Downtime (2023)Open sourceNumber of events: 6.00 events · as reported: “Loading bag”
Show verbatim quote
Loading bag 6

