Bag re-feeding after misfeed or jam
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 53 % of the line's lost time. Reported by 0 of the 112 studies that could observe it (sparse evidence).
What happens
A bag is ejected, mis-indexed, or fails to seat correctly at the filling or sealing station, so it cannot be processed in its normal cycle and the operator or an automatic recovery mechanism must pick it up and reintroduce it into the bag line for another pass. This typically stems from minor misalignment of the bag gripper, static cling between bags, or a transient sensor mismatch rather than a mechanical breakdown.
What is done about it
Improve bag separation and feed mechanisms (e.g., anti-static bars, vacuum pick timing, gripper alignment checks) and tighten sensor tolerances to reduce misfeeds, combined with operator training on quick, standardized re-feed procedures to minimize stop duration.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.2%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 53% [40–64%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.6%]14 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.3%]33 studies
- Brewing, wine and spirits0.4% [0.0–1.6%]14 studies
- Bakery and pasta0.4% [0.0–1.8%]6 studies
- Meat, poultry and seafood0.4% [0.0–1.9%]6 studies
- Fruit and vegetable processing0.4% [0.0–1.9%]4 studies
- Grain and oilseed milling0.4% [0.0–1.7%]4 studies
- Sugar and confectionery0.4% [0.0–1.8%]4 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.7%]8 studies
- Animal feed and pet food0.4% [0.0–1.8%]5 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.7%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceA bag is ejected, mis-indexed, or fails to seat correctly at the filling or sealing station, so it cannot be processed in its normal cycle and the operator or an automatic recovery mechanism must pick it up and reintroduce it into the bag line for another pass. This typically stems from minor misalignment of the bag gripper, static cling between bags, or a transient sensor mismatch rather than a mechanical breakdown.
How it looks in SCADA data
Engineering guidanceMES/SCADA logs show short machine-state transitions to a minor-stop or fault state with quick operator acknowledgement, often paired with a bag-reject or bag-recycle counter increment and no maintenance work order. Cycle time traces show brief gaps without a sustained downtime alarm, and the event frequently correlates with upstream bag-feed or gripper position sensor flags.
Countermeasure
Engineering guidanceImprove bag separation and feed mechanisms (e.g., anti-static bars, vacuum pick timing, gripper alignment checks) and tighten sensor tolerances to reduce misfeeds, combined with operator training on quick, standardized re-feed procedures to minimize stop duration.
4Sources
- Investigation on a multiscale sustainable manufacturing approach to production changeover complexity reduction and its implementation through smart surfaces and process optimization (2022)Open sourceLost time: 3.00 min · as reported: “Refed Bags”
Show verbatim quote
Refed Bags 3 0 3

