foratvise
Get Started
Equipment failure (breakdowns)

Bagasse Handling Equipment Failure

Equipment failure (breakdowns)AvailabilityMilling and grinding

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 0 of the 43 studies that could observe it (sparse evidence).

What happens

Bagasse, the fibrous residue remaining after juice extraction from the mills, is moved by dedicated conveyors, carriers or elevators toward the boiler or storage. Mechanical wear, overload, fibre buildup or misalignment in these handling components causes chain or belt jams, drive breakdowns or structural failures that interrupt the flow of material and force an unplanned stop for repair.

What is done about it

Apply preventive maintenance to conveyor chains, belts, bearings and drive motors, including scheduled clearing of fibre buildup and correct tensioning adjustments. Provide redundant handling paths or buffer capacity so a single conveyor or carrier failure does not stop the whole milling train.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.8%]
Expected share of lost time
0.3% [0.0–1.1%]
Share of lost time when present
58% [46–68%]
Studies / units
43 / 48
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.7% [0.1–3.0%]5 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.8%]1 study
  • Brewing, wine and spirits
    0.7% [0.1–2.7%]0 studies
  • Bakery and pasta
    0.7% [0.1–3.0%]0 studies
  • Meat, poultry and seafood
    0.7% [0.1–3.2%]0 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.8%]2 studies
  • Grain and oilseed milling
    0.7% [0.1–2.7%]7 studies
  • Sugar and confectionery
    0.6% [0.1–2.6%]10 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.7%]5 studies
  • Animal feed and pet food
    0.7% [0.1–2.7%]6 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.7%]7 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Bagasse, the fibrous residue remaining after juice extraction from the mills, is moved by dedicated conveyors, carriers or elevators toward the boiler or storage. Mechanical wear, overload, fibre buildup or misalignment in these handling components causes chain or belt jams, drive breakdowns or structural failures that interrupt the flow of material and force an unplanned stop for repair.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show drive fault alarms, motor overload or overcurrent trips, and torque or speed deviations on bagasse conveyors and carriers, often accompanied by a stoppage or starvation state propagating to the milling train or boiler feed. Extended machine-down states correlate with maintenance work orders tagged to bagasse handling equipment.

Countermeasure

Engineering guidance

Apply preventive maintenance to conveyor chains, belts, bearings and drive motors, including scheduled clearing of fibre buildup and correct tensioning adjustments. Provide redundant handling paths or buffer capacity so a single conveyor or carrier failure does not stop the whole milling train.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 71.0 events · as reported: “Bagasse handling”
    Show verbatim quote
    Movimentação de bagaço 71 88,8 126,8 16084,5 33,0
  2. Mean event duration: 88.8 min · as reported: “Bagasse handling”
    Show verbatim quote
    Movimentação de bagaço 71 88,8 126,8 16084,5 33,0