foratvise
Get Started
Idling and minor stops (micro-stops)

Boiler minor stoppage

Idling and minor stops (micro-stops)PerformanceUtilities (steam, compressed air, chilled water, power)

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 52 % of the line's lost time. Reported by 0 of the 131 studies that could observe it (sparse evidence).

What happens

A brief interruption in boiler operation occurs when a transient process upset, such as a momentary low water level, flame instability, or a pressure or temperature excursion, triggers an automatic safety cutout or prompts the operator to pause the unit. The condition clears quickly once the parameter returns to normal, so the boiler is restarted without any repair or maintenance action, and the stop is cleared directly by the operator.

What is done about it

Stabilize water level and pressure control loops with properly tuned feedwater and firing controls, and keep burner and sensor components under routine preventive maintenance to reduce transient trips. Train operators on fast, standardized reset procedures and review recurring minor-alarm patterns to identify and correct underlying instability before it escalates.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.3% [0.1–1.0%]
Expected share of lost time
0.2% [0.0–0.5%]
Share of lost time when present
52% [40–64%]
Studies / units
131 / 165
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.5%]13 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.3%]26 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]12 studies
  • Bakery and pasta
    0.4% [0.0–1.4%]25 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.6%]9 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.7%]7 studies
  • Grain and oilseed milling
    0.4% [0.0–1.6%]7 studies
  • Sugar and confectionery
    0.4% [0.0–1.6%]9 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.5%]5 studies
  • Animal feed and pet food
    0.4% [0.0–1.5%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.6%]11 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A brief interruption in boiler operation occurs when a transient process upset, such as a momentary low water level, flame instability, or a pressure or temperature excursion, triggers an automatic safety cutout or prompts the operator to pause the unit. The condition clears quickly once the parameter returns to normal, so the boiler is restarted without any repair or maintenance action, and the stop is cleared directly by the operator.

How it looks in SCADA data

Engineering guidance

The SCADA or MES log shows short-duration transitions of the boiler state to standby or off, with frequent start-stop cycling over a given period. Associated alarms such as low water level, flame failure, or pressure or temperature deviation appear and self-clear within a short window, and the steam or hot-water output trend shows brief dips coinciding with downstream starvation of utility-fed equipment.

Countermeasure

Engineering guidance

Stabilize water level and pressure control loops with properly tuned feedwater and firing controls, and keep burner and sensor components under routine preventive maintenance to reduce transient trips. Train operators on fast, standardized reset procedures and review recurring minor-alarm patterns to identify and correct underlying instability before it escalates.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 0.620 % · as reported: “idling minor stoppages”
    Show verbatim quote
    From the analysis of the six big losses, it is known that the causes of the low OEE value are reduced speed losses by 79.01%, breakdown by 9.17%, idling minor stoppages 0.62%, setup and adjustment 0.67%, scrap/yield losses 10.51% and rework losses 0%.