foratvise
Get Started
Equipment failure (breakdowns)

Carton Erector Equipment Failure

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

Mechanical, pneumatic or electrical components of the carton erector, such as vacuum cups, grippers, flap-folding arms, glue heads or servo drives, wear, misalign or break, so the machine can no longer pick up a blank and fold it into a square carton. Because the fault requires manual intervention or parts replacement rather than a simple reset, the erector stops producing erected cartons until maintenance restores the function.

What is done about it

Apply preventive maintenance schedules covering vacuum cup and gripper condition, pneumatic circuit integrity, glue application system cleaning, and servo drive calibration, supported by spare-parts availability for fast-wear components. Install sensors for vacuum level, air pressure and glue temperature with early-warning alarms, and perform periodic alignment checks on the folding and gluing mechanisms to prevent the failure from recurring.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
57% [45–68%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]14 studies
  • Soft drinks, bottled water and juices
    0.8% [0.1–2.5%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    0.7% [0.1–2.4%]6 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.5%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.3%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.4%]4 studies
  • Sugar and confectionery
    0.7% [0.1–2.5%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.4%]8 studies
  • Animal feed and pet food
    0.7% [0.1–2.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.3%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Mechanical, pneumatic or electrical components of the carton erector, such as vacuum cups, grippers, flap-folding arms, glue heads or servo drives, wear, misalign or break, so the machine can no longer pick up a blank and fold it into a square carton. Because the fault requires manual intervention or parts replacement rather than a simple reset, the erector stops producing erected cartons until maintenance restores the function.

How it looks in SCADA data

Engineering guidance

The erector transitions to a fault or down machine state with an equipment-specific alarm code (vacuum loss, servo overload, glue temperature, carton jam detected by a photoeye), and the stop duration exceeds the short-stop threshold logged by the MES. Downstream filling, capping or case-packing stations show starvation of erected cartons, while upstream flat-blank feeding accumulates or stalls, and the event is recorded under a maintenance work order rather than being auto-cleared by the operator.

Countermeasure

Engineering guidance

Apply preventive maintenance schedules covering vacuum cup and gripper condition, pneumatic circuit integrity, glue application system cleaning, and servo drive calibration, supported by spare-parts availability for fast-wear components. Install sensors for vacuum level, air pressure and glue temperature with early-warning alarms, and perform periodic alignment checks on the folding and gluing mechanisms to prevent the failure from recurring.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 27.0 min · as reported: “Carton Erector”
    Show verbatim quote
    3 Carton Erector 27 8%
  2. Share of lost time: 8.00 % · as reported: “Carton Erector”
    Show verbatim quote
    3 Carton Erector 27 8%