Centering disc replacement (format changeover)
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 1 of the 85 studies that could observe it (sparse evidence).
What happens
When the container format changes, the centering discs that guide and position bottles or containers at the labeler's infeed and star-wheel must be unmounted and replaced with discs sized for the new container diameter. This mechanical part exchange, together with the realignment and fine adjustment needed to restore stable centering of containers under the labeling head, consumes production time between the last good unit of the previous run and the first good unit of the new run.
What is done about it
Use quick-change or tool-less centering disc designs, pre-set and validated offline, and standardize changeover sequences with SMED methodology to reduce mechanical adjustment time. Maintaining a dedicated, labeled set of discs per container format and verifying centering with a go/no-go gauge before restart shortens the transition to stable production.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.6%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 56% [44–67%]
- Studies / units
- 85 / 113
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.4%]11 studies
- Soft drinks, bottled water and juices0.8% [0.1–2.6%]29 studies
- Brewing, wine and spirits0.6% [0.1–2.2%]13 studies
- Bakery and pasta0.7% [0.1–2.6%]1 study
- Meat, poultry and seafood0.7% [0.1–2.7%]4 studies
- Fruit and vegetable processing0.7% [0.1–2.6%]4 studies
- Grain and oilseed milling0.7% [0.1–2.8%]3 studies
- Sugar and confectionery0.7% [0.1–2.6%]3 studies
- Snacks, coffee, tea and other foods0.6% [0.1–2.5%]4 studies
- Animal feed and pet food0.7% [0.1–2.5%]4 studies
- Food manufacturing (unspecified or mixed)0.7% [0.1–2.5%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceWhen the container format changes, the centering discs that guide and position bottles or containers at the labeler's infeed and star-wheel must be unmounted and replaced with discs sized for the new container diameter. This mechanical part exchange, together with the realignment and fine adjustment needed to restore stable centering of containers under the labeling head, consumes production time between the last good unit of the previous run and the first good unit of the new run.
How it looks in SCADA data
Engineering guidanceMES/SCADA records an extended changeover or setup machine-state on the labeler following a format or SKU change event, with the labeler infeed stopped while upstream conveying accumulates and downstream stations starve. Repeated short stop-adjust-run cycles may appear immediately after restart as centering is fine-tuned before the line reaches rated speed with acceptable label placement.
Countermeasure
Engineering guidanceUse quick-change or tool-less centering disc designs, pre-set and validated offline, and standardize changeover sequences with SMED methodology to reduce mechanical adjustment time. Maintaining a dedicated, labeled set of discs per container format and verifying centering with a go/no-go gauge before restart shortens the transition to stable production.
4Sources
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 5.00 min · as reported: “Replacement of centering discs”
Show verbatim quote
Troca dos discos centralizadores 5
- USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS (2012)Open sourceLost time: 5.00 min · as reported: “Replacement of centering discs”
Show verbatim quote
Troca dos discos centralizadores 5

