Included study
USO DA TROCA RÁPIDA DE FERRAMENTAS – TRF – COMO ESTRATÉGIA DE AUMENTO DE PRODUTIVIDADE EM UMA ROTULADORA DE GARRAFAS PLÁSTICAS
1Bibliographic record
- Authors
- Teonas Bartz, Júlio Cezar Mairesse Siluk, Evandro Tafarel Riffel
- Year
- 2012
- Venue
- Tecno-Lógica
- Country
- Brazil
- Segment
- Soft drinks, bottled water and juices
- Process family
- Filling and packaging line
- Study type
- Before/after intervention
- Extraction scope
- Full text
- Size
- 1 plants · 1 lines · 5 machines
- Observation period
- 365 days
- Data collection
- manual_logs
- Intervention
Show the setting as described by the study
A linha de produção em que foi utilizada a técnica da TRF para redução do tempo de setup produz quatro tamanhos de embalagens: 350 ml; 500 ml; 1,5 l e 2 l, e envasa água mineral e energético.
2Risk of bias
Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 11Moderate risk
| Item | Score |
|---|---|
| Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described. | 2 / 2 |
| Is the observation period long enough and reported?Period reported but shorter than 30 days, or only the number of shifts is given. | 1 / 2 |
| How were loss data collected?Manual logs or maintenance records with unknown completeness. | 1 / 2 |
| Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown. | 1 / 2 |
| Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed. | 1 / 2 |
| Is there evidence of selective reporting of favourable results?Observational study, or intervention study that reports baseline and post-intervention data with the same method. | 2 / 2 |
| Are the reported numbers internally consistent?Small inconsistencies (2 to 10 percentage points) or values that cannot be cross-checked. | 1 / 2 |
| Could conflicts of interest or the source of the data bias the result?Academic or independent study, or conflicts declared and unrelated to the result. | 2 / 2 |
3Extracted data
Each datum with its classification and the verbatim quote that states it.
| Reported cause | Loss category | Metric | Value | Extraction |
|---|---|---|---|---|
—rotuladoraShow verbatim quote (Section 4.2, Tabela 2)O setup da rotuladora não é o mais demorado da linha de produção, pois levava em média 50,5 minutos, como mostra a Tabela 2. | Setup and adjustments | Mean event duration | 50.5 min | Single extractor |
Prepare tools and PPEShow verbatim quote (Tabela 3)Providenciar ferramentas e EPIs 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Placement of partsShow verbatim quote (Tabela 3)Colocação das peças 5 | Setup and adjustments | Lost time | 5.00 min | Single extractor |
Cleaning the label magazinemagazine de rótulosShow verbatim quote (Tabela 3)Limpeza do magazine 4 | Setup and adjustments | Lost time | 4.00 min | Single extractor |
Replacement of centering discsdiscos centralizadoresShow verbatim quote (Tabela 3)Troca dos discos centralizadores 5 | Setup and adjustments | Lost time | 5.00 min | Single extractor |
Entry worm screwcaracol de entradaShow verbatim quote (Tabela 3)Caracol de entrada 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Central star wheel and central guideestrela central e guia centralShow verbatim quote (Tabela 3)Estela central e guia central 4 | Setup and adjustments | Lost time | 4.00 min | Single extractor |
Entry star wheel and entry guideestrela de entrada e guia de entradaShow verbatim quote (Tabela 3)Estrela de entrada e guia de entrada 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Rubber roller and glue scraperrolo de borracha e raspador de colaShow verbatim quote (Tabela 3)Rolo de borracha e raspador de cola 5 | Setup and adjustments | Lost time | 5.00 min | Single extractor |
Adjustment of tulip heighttulipasShow verbatim quote (Tabela 3)Regulagem da altura das tulipas 2 | Setup and adjustments | Lost time | 2.00 min | Single extractor |
Adjustment of gluing unitsgrupos coladoresShow verbatim quote (Tabela 3)Regulagem dos grupos coladores 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Adjustment of reject/discard systemsistema de descarteShow verbatim quote (Tabela 3)Regulagem do descarte 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Adjustment of the printerimpressora inkjetShow verbatim quote (Tabela 3)Regulagem da impressora 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Adjustment of label sensorssensores de rótulosShow verbatim quote (Tabela 3)Regulagem dos sensores dos rótulos 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Adjustment of conveyor belts and guidesesteiras e guiasShow verbatim quote (Tabela 3)Regulagem das esteiras e guias 13 | Setup and adjustments | Lost time | 13.0 min | Single extractor |
—rotuladoraShow verbatim quote (Section 5 Conclusões)Com base nos dados de produção do ano de 2010 foram realizadas 153 trocas de ferramenta de 50 minutos cada totalizando 125 horas em setup, o que significa uma média de três trocas por semana. | Setup and adjustments | Number of events | 153 events | Single extractor |
—rotuladoraShow verbatim quote (Section 5 Conclusões)Com base nos dados de produção do ano de 2010 foram realizadas 153 trocas de ferramenta de 50 minutos cada totalizando 125 horas em setup, o que significa uma média de três trocas por semana. | Setup and adjustments | Lost time | 125 h | Single extractor |
Prepare tools and PPEShow verbatim quote (Tabela 4)Providenciar ferramentas e EPIs Setup externo = 0 | Setup and adjustments | Lost time | 0 min | Single extractor |
Placement of partsShow verbatim quote (Tabela 4)Colocação das peças Setup externo = 0 | Setup and adjustments | Lost time | 0 min | Single extractor |
Cleaning the label magazinemagazine de rótulosShow verbatim quote (Tabela 4)Limpeza do magazine Setup externo = 0 | Setup and adjustments | Lost time | 0 min | Single extractor |
Replacement of centering discsdiscos centralizadoresShow verbatim quote (Tabela 4)Troca dos discos centralizadores 5 | Setup and adjustments | Lost time | 5.00 min | Single extractor |
Entry worm screwcaracol de entradaShow verbatim quote (Tabela 4)Caracol de entrada 2 | Setup and adjustments | Lost time | 2.00 min | Single extractor |
Central star wheel and central guideestrela central e guia centralShow verbatim quote (Tabela 4)Estela central e guia central 4 | Setup and adjustments | Lost time | 4.00 min | Single extractor |
Entry star wheel and entry guideestrela de entrada e guia de entradaShow verbatim quote (Tabela 4)Estrela de entrada e guia de entrada 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Rubber roller and glue scraperrolo de borracha e raspador de colaShow verbatim quote (Tabela 4)Rolo de borracha e raspador de cola 2 | Setup and adjustments | Lost time | 2.00 min | Single extractor |
Adjustment of tulip heighttulipasShow verbatim quote (Tabela 4)Regulagem da altura das tulipas 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Adjustment of gluing unitsgrupos coladoresShow verbatim quote (Tabela 4)Regulagem dos grupos coladores 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Adjustment of reject/discard systemsistema de descarteShow verbatim quote (Tabela 4)Regulagem do descarte 3 | Setup and adjustments | Lost time | 3.00 min | Single extractor |
Adjustment of the printerimpressora inkjetShow verbatim quote (Tabela 4)Regulagem da impressora 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Adjustment of label sensorssensores de rótulosShow verbatim quote (Tabela 4)Regulagem dos sensores dos rótulos 1 | Setup and adjustments | Lost time | 1.00 min | Single extractor |
Adjustment of conveyor belts and guidesesteiras e guiasShow verbatim quote (Tabela 4)Regulagem das esteiras e guias 4 | Setup and adjustments | Lost time | 4.00 min | Single extractor |
—sopradoraShow verbatim quote (Tabela 1)Sopradora 76 | Setup and adjustments | Mean event duration | 76.0 min | Single extractor |
—sopradoraShow verbatim quote (Section 5 Conclusões)também da sopradora que após melhorias implantadas com a troca rápida de ferramenta, tem um tempo de setup de 35 minutos | Setup and adjustments | Mean event duration | 35.0 min | Single extractor |
—enchedoraShow verbatim quote (Tabela 1)Enchedora 55 | Setup and adjustments | Mean event duration | 55.0 min | Single extractor |
—envolvedoraShow verbatim quote (Tabela 1)Envolvedora 22 | Setup and adjustments | Mean event duration | 22.0 min | Single extractor |
—paletizadorShow verbatim quote (Tabela 1)Paletizador 10,5 | Setup and adjustments | Mean event duration | 10.5 min | Single extractor |
Adjust profiles and conveyor guidesShow verbatim quote (Table 3, Section 4.4)Tabela 3. Regulagem dos perfis e guias das esteiras conforme embalagem, sendo necessário ora abrir ora fechar: 13 | Setup and adjustments | Mean event duration | 13.0 min | Single extractor |
Observation units
- Rotuladora (before SMED) · Labeling and coding · Baseline
- Rotuladora (after SMED) · Labeling and coding · After intervention
- Sopradora · Forming, moulding and depositing · Baseline
- Sopradora · Forming, moulding and depositing · After intervention
- Enchedora · Filling · Baseline
- Envolvedora · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
- Paletizador · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
- Labeler · Labeling and coding · Baseline

