foratvise
Get Started
Process defects (scrap and rework)

Container cracking and contamination

Process defects (scrap and rework)QualityWhole line or unspecified equipment

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 47 % of the line's lost time. Reported by 2 of the 127 studies that could observe it (limited evidence).

What happens

Bottles or other containers develop cracks or micro-fractures from mechanical stress, impact, thermal shock or inherent material defects during handling, filling or capping, and these breaches allow product leakage or ingress of dirt, microorganisms or foreign matter. The affected units no longer meet hygiene or integrity specifications and are rejected at the first quality check.

What is done about it

Tighten incoming inspection and supplier quality agreements for container integrity, and reduce mechanical stress by adjusting conveyor guides, star wheels and transfer points that handle the containers. Review thermal profiles in washing, filling or pasteurization steps to avoid thermal shock, and recalibrate vision or crack-detection inspection systems to catch defective containers before filling.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.2–1.8%]
Expected share of lost time
0.3% [0.1–0.9%]
Share of lost time when present
47% [35–59%]
Studies / units
127 / 161
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–2.9%]13 studies
  • Soft drinks, bottled water and juices
    1.0% [0.1–3.1%]26 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.7%]11 studies
  • Bakery and pasta
    0.8% [0.1–2.5%]24 studies
  • Meat, poultry and seafood
    1.2% [0.2–4.1%]9 studies
  • Fruit and vegetable processing
    0.8% [0.1–2.9%]7 studies
  • Grain and oilseed milling
    0.8% [0.1–3.1%]6 studies
  • Sugar and confectionery
    0.8% [0.1–2.6%]9 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.0%]5 studies
  • Animal feed and pet food
    0.9% [0.1–3.0%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.9%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Bottles or other containers develop cracks or micro-fractures from mechanical stress, impact, thermal shock or inherent material defects during handling, filling or capping, and these breaches allow product leakage or ingress of dirt, microorganisms or foreign matter. The affected units no longer meet hygiene or integrity specifications and are rejected at the first quality check.

How it looks in SCADA data

Engineering guidance

Inspection, vision or checkweighing stations show spikes in reject counts flagged as contamination or container defect, without a corresponding equipment-fault alarm; quality or sensory alarms may trigger intermittently while machine run states remain nominal. Reject rate trends correlate with specific container batches or upstream handling points rather than with a single asset downtime event.

Countermeasure

Engineering guidance

Tighten incoming inspection and supplier quality agreements for container integrity, and reduce mechanical stress by adjusting conveyor guides, star wheels and transfer points that handle the containers. Review thermal profiles in washing, filling or pasteurization steps to avoid thermal shock, and recalibrate vision or crack-detection inspection systems to catch defective containers before filling.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 57.0 % · as reported: “contamination”
    Show verbatim quote
    As principais causas de condenação total foram contaminação, escaldagem excessiva e evisceração retardada (57,0, 20,8 e 16,8%, respectivamente) totalizando 94,6% das condenações, conforme apresentado na Figura 1.
  2. Defect rate: 2.10 % · as reported: “Bottle cracks, contamination”
    Show verbatim quote
    February 100,000 2,100 Bottle cracks, contamination 2.1 Increased inspection frequency