Bottle jam or fall on conveyor
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 53 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
Bottles lose stable positioning on the conveyor near the filler due to guide rail misalignment, speed mismatch between conveyor sections, uneven bottle base or surface friction, or accumulation pressure, causing them to tip over or wedge against rails and neighbouring containers. The resulting fallen or jammed bottle blocks the flow of containers until an operator clears it.</br>
What is done about it
Align and adjust conveyor guide rails and star wheels to the bottle format, synchronize speeds between conveyor sections and the filler, and install or recalibrate photoeyes to detect fallen or jammed containers early so operators can clear them quickly. Regular preventive checks of rail wear and bottle stability testing for new formats reduce recurrence.</br>
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.3% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 53% [40–64%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.5%]18 studies
- Soft drinks, bottled water and juices0.3% [0.0–1.2%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.5%]16 studies
- Bakery and pasta0.4% [0.0–1.8%]0 studies
- Meat, poultry and seafood0.4% [0.0–1.5%]6 studies
- Fruit and vegetable processing0.4% [0.0–1.7%]4 studies
- Grain and oilseed milling0.4% [0.0–1.8%]6 studies
- Sugar and confectionery0.4% [0.0–1.7%]3 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.6%]6 studies
- Animal feed and pet food0.4% [0.0–1.8%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.7%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceBottles lose stable positioning on the conveyor near the filler due to guide rail misalignment, speed mismatch between conveyor sections, uneven bottle base or surface friction, or accumulation pressure, causing them to tip over or wedge against rails and neighbouring containers. The resulting fallen or jammed bottle blocks the flow of containers until an operator clears it.</br>
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show frequent short stop events at the filler infeed or conveyor zone, often paired with photoeye or sensor blocked alarms and a rise in minor-stop counters without any maintenance work order. Upstream equipment shows blocking and downstream filling heads show starvation during these short gaps, with cycle time variability on the conveyor section preceding the fault location.</br>
Countermeasure
Engineering guidanceAlign and adjust conveyor guide rails and star wheels to the bottle format, synchronize speeds between conveyor sections and the filler, and install or recalibrate photoeyes to detect fallen or jammed containers early so operators can clear them quickly. Regular preventive checks of rail wear and bottle stability testing for new formats reduce recurrence.</br>
4Sources
- A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT” (2023)Open sourceNumber of events: 21.0 events · as reported: “Bottle falling”
Show verbatim quote
1 Bottle falling 21 21 34%
- A SEMINAR PAPER ON “OVERALL EQUIPMENT EFFECTIVENESS: A CASE STUDY AT A BOTTLING PLANT” (2023)Open sourceNumber of events: 2.00 events · as reported: “Bottle jam”
Show verbatim quote
6 Bottle jam 2 59 97%

