foratvise
Get Started
organizational external

Empty container supply shortage

organizational externalFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

The filling line runs out of empty bottles or other containers because upstream supply, inventory replenishment, or procurement fails to match consumption, forcing the filler to stop for lack of material to fill. This is an external/organizational interruption rather than a mechanical failure of the filler itself.

What is done about it

Improve supply chain and inventory planning for containers, including safety stock levels, better coordination with container suppliers or upstream washing/forming operations, and real-time visibility of buffer stock to trigger timely replenishment before depletion.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
56% [44–66%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]18 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.3%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]16 studies
  • Bakery and pasta
    0.5% [0.0–1.8%]0 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.6%]6 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.7%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–1.9%]6 studies
  • Sugar and confectionery
    0.4% [0.0–1.7%]3 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.7%]6 studies
  • Animal feed and pet food
    0.4% [0.0–1.8%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The filling line runs out of empty bottles or other containers because upstream supply, inventory replenishment, or procurement fails to match consumption, forcing the filler to stop for lack of material to fill. This is an external/organizational interruption rather than a mechanical failure of the filler itself.

How it looks in SCADA data

Engineering guidance

SCADA shows the filler entering a starved/idle state with no upstream jam or fault alarm, often correlated with an empty-container buffer or infeed conveyor running empty; machine-state logs record a stop with cause tagged as material shortage rather than mechanical fault, and the stop tends to persist until material replenishment is logged.

Countermeasure

Engineering guidance

Improve supply chain and inventory planning for containers, including safety stock levels, better coordination with container suppliers or upstream washing/forming operations, and real-time visibility of buffer stock to trigger timely replenishment before depletion.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 5.00 events · as reported: “Bottle shortage”
    Show verbatim quote
    4 Bottle shortage 5 54 89%