foratvise
Get Started
Equipment failure (breakdowns)

Control panel failure

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 120 studies that could observe it (sparse evidence).

What happens

The electrical or electronic control panel governing the filler loses function due to component degradation, loose or corroded wiring, power supply faults, PLC/HMI module failure or thermal stress inside the cabinet, so the machine can no longer be commanded or supervised correctly. This forces the equipment into a fault state and halts production until the panel is repaired.

What is done about it

Implement preventive maintenance on control cabinets including cleaning, tightening of terminals, verification of power supplies and cabinet cooling/ventilation, plus periodic functional testing of PLC and HMI modules. Keep critical spare modules on hand and apply condition monitoring on cabinet temperature and power quality to detect degradation before a full failure occurs.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.6% [0.1–1.7%]
Expected share of lost time
0.3% [0.1–1.0%]
Share of lost time when present
57% [46–67%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.9% [0.1–3.5%]18 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.9%]44 studies
  • Brewing, wine and spirits
    0.7% [0.1–2.3%]16 studies
  • Bakery and pasta
    0.7% [0.1–2.6%]0 studies
  • Meat, poultry and seafood
    0.7% [0.1–2.5%]6 studies
  • Fruit and vegetable processing
    0.7% [0.1–2.5%]4 studies
  • Grain and oilseed milling
    0.7% [0.1–2.6%]6 studies
  • Sugar and confectionery
    0.7% [0.1–2.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.7% [0.1–2.5%]6 studies
  • Animal feed and pet food
    0.7% [0.1–2.8%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.7% [0.1–2.4%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

The electrical or electronic control panel governing the filler loses function due to component degradation, loose or corroded wiring, power supply faults, PLC/HMI module failure or thermal stress inside the cabinet, so the machine can no longer be commanded or supervised correctly. This forces the equipment into a fault state and halts production until the panel is repaired.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show a sudden transition to fault or offline machine state with loss of communication or heartbeat signal from the filler controller, often accompanied by power supply, I/O or HMI fault alarms with no preceding warning trend. The event appears as an unplanned stop of indeterminate duration until maintenance resets or replaces the panel, and upstream/downstream equipment shows blocking or starvation during the outage.

Countermeasure

Engineering guidance

Implement preventive maintenance on control cabinets including cleaning, tightening of terminals, verification of power supplies and cabinet cooling/ventilation, plus periodic functional testing of PLC and HMI modules. Keep critical spare modules on hand and apply condition monitoring on cabinet temperature and power quality to detect degradation before a full failure occurs.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 7.40 h · as reported: “Control panel failure”
    Show verbatim quote
    Falla en tablero 7,40 88%