foratvise
Get Started
Included study

Proposal for improvement to increase the overall equipment effectiveness (OEE) of a dairy products company through a Preventive Maintenance Plan, Standardized Work, and SMED

Open source

1Bibliographic record

Authors
Sosa Gomez, Brenda Vanessa, Avendaño Reategui, Jose Israel
Year
2025
Venue
Repositorio Académico UPC (Universidad Peruana de Ciencias Aplicadas)
DOI
—
Country
Peru
Segment
Dairy products
Process family
Filling and packaging line
Study type
Before/after intervention
Extraction scope
Full text
Size
1 plants · 1 lines · 1 machines
Observation period
365 days
Data collection
manual_logs
Intervention
Show the setting as described by the study
Este subproceso abarca las operaciones de llenado, tapado (sellado) y etiquetado de las botellas, realizadas mediante la máquina envasadora, mientras que el etiquetado final se efectúa manualmente.

2Risk of bias

Scored with the rubric of the protocol: 2 low concern, 1 some concerns, 0 high concern.
Total score 9Moderate risk
ItemScore
Is the observed line, machine or plant described well enough to classify its segment, process and equipment?Product, process and equipment are all described.2 / 2
Is the observation period long enough and reported?Period reported and at least 30 days of production (or at least 100 recorded events).2 / 2
How were loss data collected?Manual logs or maintenance records with unknown completeness.1 / 2
Are OEE, loading time and the loss categories defined explicitly?A standard definition is cited but its application is not shown.1 / 2
Does the loss breakdown account for the total loss it claims to explain?Only the top causes are reported and the unexplained remainder can be computed.1 / 2
Is there evidence of selective reporting of favourable results?Intervention study in which baseline and post-intervention periods differ in length or method.1 / 2
Are the reported numbers internally consistent?Inconsistencies above 10 percentage points, or OEE factors above 100%.0 / 2
Could conflicts of interest or the source of the data bias the result?Authors are employees of the plant or of an equipment/software vendor; no declaration.1 / 2

3Extracted data

Each datum with its classification and the verbatim quote that states it.
Reported causeLoss categoryMetricValueExtraction
—llenadora/envasadora
Show verbatim quote (Table 15)
Producción real 24 botellas/hora
noneThroughput24.0 botellas/horaBoth extractors agreed
—llenadora/envasadora
Show verbatim quote (Table 11)
Calidad 99,5%
noneQuality99.5 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Table 11)
Rendimiento 88,1%
nonePerformance88.1 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Table 11)
Disponibilidad 74,9%
noneAvailability74.9 %Both extractors agreed
—selladora
Show verbatim quote (Table 15)
Cumplimiento del tiempo estándar (1.09 / 2.50) × 100 43.6 %
noneSpeed ratio43.6 %Both extractors agreed
—selladora
Show verbatim quote (Table 23)
Cumplimiento del tiempo estándar (1,09 / 1,12) × 100 97,3%
noneSpeed ratio97.3 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Anexo 11)
Alimentación 3,70% OEE 85,66%
noneOEE85.7 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Anexo 11)
Disponibilidad Rendimiento Calidad 87,5% 98,00% 99,95%
noneAvailability87.5 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Anexo 11)
Disponibilidad Rendimiento Calidad 87,5% 98,00% 99,95%
noneQuality100.0 %Both extractors agreed
—llenadora/envasadora
Show verbatim quote (Table 11)
Se determinó que la OEE del subproceso de envasado en 2024 alcanzó un 65,9 %
noneOEE65.9 %Both extractors agreed
Piston changepiston
Show verbatim quote (Table 9)
Cambio de pistón 2,30 100%
Equipment failure (breakdowns)Lost time2.30 hBoth extractors agreed
Control panel failurecontrol panel
Show verbatim quote (Table 9)
Falla en tablero 7,40 88%
Equipment failure (breakdowns)Lost time7.40 hBoth extractors agreed
Low nozzle pressurenozzles
Show verbatim quote (Table 9)
Baja presión en boquillas 3,50 98%
Equipment failure (breakdowns)Lost time3.50 hBoth extractors agreed
Nozzle wearnozzles
Show verbatim quote (Table 9)
Desgaste de boquillas 19,00 49%
Equipment failure (breakdowns)Lost time19.0 hBoth extractors agreed
Dosing table jamdosing table
Show verbatim quote (Table 9)
Atasco mesa dosificado 9,00 57%
Equipment failure (breakdowns)Lost time9.00 hBoth extractors agreed
Dirt on conveyor rollersconveyor rollers
Show verbatim quote (Table 9)
Suciedad en rodillos transporte 7,00 95%
Equipment failure (breakdowns)Lost time7.00 hBoth extractors agreed
Bolt/fastener breakagefasteners
Show verbatim quote (Table 9)
Rotura de pernería 8,50 74%
Equipment failure (breakdowns)Lost time8.50 hBoth extractors agreed
Guide jamguide
Show verbatim quote (Table 9)
Atasco de guía 7,60 81%
Equipment failure (breakdowns)Lost time7.60 hBoth extractors agreed
Nozzle cleaningnozzles
Show verbatim quote (Table 9)
Limpieza de boquillas 8,70 66%
Equipment failure (breakdowns)Lost time8.70 hBoth extractors agreed
Pump jamminglobe pump
Show verbatim quote (Table 9)
Trabamiento de bomba 32,50 31%
Equipment failure (breakdowns)Lost time32.5 hBoth extractors agreed
reprocesos manuales (resellado, cambio de tapa, limpieza de bordes, reetiquetado)selladora
Show verbatim quote (Table 12)
Total por día en horas 1,11 1,02 1,01 1,21 1,16 1,08 1,00 1,22 1,15 1,05 Promedio 1,10
Process defects (scrap and rework)Lost time1.10 hBoth extractors agreed
—
Show verbatim quote (Table 4)
Disponibilidad 79,6% 71,1% 85%
noneAvailability79.6 %Single extractor
—
Show verbatim quote (Table 4)
Rendimiento 93,2%
nonePerformance93.2 %Single extractor
—
Show verbatim quote (Table 4)
Calidad 95,9%
noneQuality95.9 %Single extractor
—
Show verbatim quote (Section 2.2.1)
Tal como se señaló en el análisis anterior, la eficiencia actual del proceso productivo es de 71,1%.
noneOEE71.1 %Single extractor
averías de la máquina de envasadollenadora/envasadora
Show verbatim quote (Table 10)
el MTBF es de 5.03 horas y el MTTR es de 1.69 horas, afectando estas la disponibilidad del equipo
Equipment failure (breakdowns)Time between events5.03 hSingle extractor
averías de la máquina de envasadollenadora/envasadora
Show verbatim quote (Table 10)
el MTBF es de 5.03 horas y el MTTR es de 1.69 horas, afectando estas la disponibilidad del equipo
Equipment failure (breakdowns)Mean event duration1.69 hSingle extractor
averías/reparacionesllenadora/envasadora
Show verbatim quote (Figure 6)
los motivos son las averías / reparaciones, reprocesos, cambios de formato y otros donde estas representan el 41.1%, 35.7% y 23.3% respectivamente
Equipment failure (breakdowns)Share of lost time41.1 %Single extractor
reprocesosllenadora/envasadora
Show verbatim quote (Figure 6)
los motivos son las averías / reparaciones, reprocesos, cambios de formato y otros donde estas representan el 41.1%, 35.7% y 23.3% respectivamente
Process defects (scrap and rework)Share of lost time35.7 %Single extractor
cambios de formatollenadora/envasadora
Show verbatim quote (Figure 6)
los motivos son las averías / reparaciones, reprocesos, cambios de formato y otros donde estas representan el 41.1%, 35.7% y 23.3% respectivamente
Setup and adjustmentsShare of lost time23.3 %Single extractor
reprocesos manuales en envasadoselladora
Show verbatim quote (Figure 8)
con picos destacados en determinados meses obteniendo un promedio de 1,73 horas.
Process defects (scrap and rework)Lost time1.73 hSingle extractor
cambio de formatollenadora/envasadora
Show verbatim quote (Section 2.3)
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos siendo el objetivo de 19 minutos
Setup and adjustmentsMean event duration26.0 minSingle extractor
cambio de formatollenadora/envasadora
Show verbatim quote (Section 2.3)
con respecto a las 278 paradas de cambio de formato hace una demora anual de 1946 minutos
Setup and adjustmentsNumber of events278 eventsSingle extractor
—llenadora/envasadora
Show verbatim quote (Anexo 3)
Disponibilidad Rendimiento Calidad 77,8% 90,52% 93,60%
noneAvailability77.8 %Single extractor
—llenadora/envasadora
Show verbatim quote (Anexo 3)
Disponibilidad Rendimiento Calidad 77,8% 90,52% 93,60%
nonePerformance90.5 %Single extractor
—llenadora/envasadora
Show verbatim quote (Anexo 3)
Disponibilidad Rendimiento Calidad 77,8% 90,52% 93,60%
noneQuality93.6 %Single extractor
—llenadora/envasadora
Show verbatim quote (Anexo 3)
Alimentación 3,70% 65,91% OEE
noneOEE65.9 %Single extractor
Charlas/Reuniones
Show verbatim quote (Anexo 3)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 2,10% 0,05%
Organizational or external stops (material or personnel shortage, utilities outage)Share of planned time1.50 %Single extractor
Velocidad reducida
Show verbatim quote (Anexo 3)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 2,10% 0,05%
Reduced speedShare of planned time2.10 %Single extractor
Defectuosos
Show verbatim quote (Anexo 3)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 2,10% 0,05%
Process defects (scrap and rework)Share of planned time0.0500 %Single extractor
Preparación de línea
Show verbatim quote (Anexo 3)
Preparación de línea Averías / Paros Reprocesos en envasado 1,15% 7,38% 6,35%
Setup and adjustmentsShare of planned time1.15 %Single extractor
Averías/Parosllenadora/envasadora
Show verbatim quote (Anexo 3)
Preparación de línea Averías / Paros Reprocesos en envasado 1,15% 7,38% 6,35%
Equipment failure (breakdowns)Share of planned time7.38 %Single extractor
Reprocesos en envasadoselladora
Show verbatim quote (Anexo 3)
Preparación de línea Averías / Paros Reprocesos en envasado 1,15% 7,38% 6,35%
Process defects (scrap and rework)Share of planned time6.35 %Single extractor
Regulacionesllenadora/envasadora
Show verbatim quote (Anexo 3)
Regulaciones 4,62%
Setup and adjustmentsShare of planned time4.62 %Single extractor
Cambios de formatollenadora/envasadora
Show verbatim quote (Anexo 3)
Cambios de formato 4,24%
Setup and adjustmentsShare of planned time4.24 %Single extractor
Limpiezallenadora/envasadora
Show verbatim quote (Anexo 3)
Limpieza 1,90%
Setup and adjustmentsShare of planned time1.90 %Single extractor
Tiempos de inactividadllenadora/envasadora
Show verbatim quote (Anexo 3)
Tiempos de inactividad 5,10%
Idling and minor stops (micro-stops)Share of planned time5.10 %Single extractor
Alimentaciónllenadora/envasadora
Show verbatim quote (Anexo 3)
Alimentación 3,70%
Idling and minor stops (micro-stops)Share of planned time3.70 %Single extractor
—llenadora/envasadora
Show verbatim quote (Table 24)
OEE 65,9 % 85,69 % 85%
noneOEE85.7 %Single extractor
averías de la máquina de envasadollenadora/envasadora
Show verbatim quote (Table 24)
MTBF 5,03 hr 13.32 hr 15,00 hr
Equipment failure (breakdowns)Time between events13.3 hrSingle extractor
—selladora
Show verbatim quote (Table 24)
Cumplimiento del tiempo estándar (%) 43,6 % 95 % 97,3 %
noneSpeed ratio95.0 %Single extractor
cambio de formatollenadora/envasadora
Show verbatim quote (Table 24)
Tiempo de Set Up 26 min 19,5 min 19,00 min
Setup and adjustmentsMean event duration19.5 minSingle extractor
averías de la máquina de envasadollenadora/envasadora
Show verbatim quote (Table 21)
MTBF 12,67 14,62 12,67 3.33
Equipment failure (breakdowns)Time between events3.33 minSingle extractor
averías de la máquina de envasadollenadora/envasadora
Show verbatim quote (Table 21)
MTTR 0,80 0,77 0,80 0,20
Equipment failure (breakdowns)Mean event duration0.200 minSingle extractor
—llenadora/envasadora
Show verbatim quote (Table 21)
Disponibilidad 94,1% 95,0% 94,1% 94,4%
noneAvailability94.4 %Single extractor
—llenadora/envasadora
Show verbatim quote (Anexo 11)
Disponibilidad Rendimiento Calidad 87,5% 98,00% 99,95%
nonePerformance98.0 %Single extractor
Charlas/Reuniones
Show verbatim quote (Anexo 11)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 1,00% 0,05%
Organizational or external stops (material or personnel shortage, utilities outage)Share of planned time1.50 %Single extractor
Velocidad reducida
Show verbatim quote (Anexo 11)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 1,00% 0,05%
Reduced speedShare of planned time1.00 %Single extractor
Defectuosos
Show verbatim quote (Anexo 11)
Charlas /Reuniones Velocidad reducida Defectuosos 1,50% 1,00% 0,05%
Process defects (scrap and rework)Share of planned time0.0500 %Single extractor
Preparación de línea
Show verbatim quote (Anexo 11)
Preparación de línea Averías / Paros ELIMINADO 1,15% 1,00%
Setup and adjustmentsShare of planned time1.15 %Single extractor
Averías/Parosllenadora/envasadora
Show verbatim quote (Anexo 11)
Preparación de línea Averías / Paros ELIMINADO 1,15% 1,00%
Equipment failure (breakdowns)Share of planned time1.00 %Single extractor
Regulacionesllenadora/envasadora
Show verbatim quote (Anexo 11)
Regulaciones 1,30% REDUCIDO
Setup and adjustmentsShare of planned time1.30 %Single extractor
Cambios de formatollenadora/envasadora
Show verbatim quote (Anexo 11)
Cambios de formato 1,50% REDUCIDO
Setup and adjustmentsShare of planned time1.50 %Single extractor
Limpiezallenadora/envasadora
Show verbatim quote (Anexo 11)
Limpieza 1,90%
Setup and adjustmentsShare of planned time1.90 %Single extractor
Tiempos de inactividadllenadora/envasadora
Show verbatim quote (Anexo 11)
Tiempos de inactividad 1,50% REDUCIDO
Idling and minor stops (micro-stops)Share of planned time1.50 %Single extractor
Alimentaciónllenadora/envasadora
Show verbatim quote (Anexo 11)
Alimentación 3,70%
Idling and minor stops (micro-stops)Share of planned time3.70 %Single extractor
cambio de formatollenadora/envasadora
Show verbatim quote (Figure 23)
donde el promedio del cambio de formato es de 19.53 minutos
Setup and adjustmentsMean event duration19.5 minSingle extractor
—selladora
Show verbatim quote (Section 4.1.2)
también aumentó el porcentaje de Calidad el cual pasó de 93,6% a 99,5%
noneQuality99.5 %Single extractor
—Máquina envasadora
Show verbatim quote (Tabla 10, P. Acumulado)
MTBF 5,03
Equipment failure (breakdowns)Time between events5.03 hSingle extractor
Cambio de formatoMáquina envasadora
Show verbatim quote (Página 16)
La variación del tiempo del Set – up a lo largo del año es en promedio de 26 minutos
Setup and adjustmentsLost time26.0 minSingle extractor
—
Show verbatim quote (Tabla 14)
Producción estándar 55 botellas/hora
noneThroughput55.0 bottles/hSingle extractor
Cambio de formatoMáquina envasadora
Show verbatim quote (Tabla 24)
Tiempo de Set Up 26 min → 19,5 min
Setup and adjustmentsLost time19.5 minSingle extractor
—
Show verbatim quote (Tabla 23)
Tiempo Post mejora 60 / 54 = 1,12 botella/min
noneThroughput54.0 bottles/hSingle extractor

Observation units

  • Envasado subprocess - filling/sealing machine (Envasadora Maplascali SAS, 'Llenadora de Yogurt') · Filling · Baseline
  • Envasado subprocess - filling/sealing machine (Envasadora Maplascali SAS, 'Llenadora de Yogurt') · Filling · After intervention
  • Yogurt 1L production process (whole process) · Whole line or unspecified equipment · Baseline
  • Yogurt 1L packaging line · Packaging (forming, sealing, wrapping, case packing, palletizing) · Baseline
  • Yogurt 1L packaging line · Packaging (forming, sealing, wrapping, case packing, palletizing) · After intervention