Conveyor belt system failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).
What happens
The conveyor belt or its drive, rollers, bearings, motor or tracking components degrade or break, causing the belt to stop moving product through the packaging line. This typically results from mechanical wear, misalignment, belt tearing, or drive train failure that requires maintenance intervention to repair.
What is done about it
Implement preventive maintenance programs covering belt tension, alignment, lubrication and bearing inspection, and install condition monitoring (vibration, motor current, temperature) to detect degradation before failure. Maintain spare parts for critical drive components and train operators to recognize early warning signs of misalignment or wear.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.6% [0.1–1.6%]
- Expected share of lost time
- 0.3% [0.1–0.9%]
- Share of lost time when present
- 57% [45–67%]
- Studies / units
- 112 / 155
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.1–2.2%]14 studies
- Soft drinks, bottled water and juices0.8% [0.1–2.4%]33 studies
- Brewing, wine and spirits0.6% [0.1–2.4%]14 studies
- Bakery and pasta0.7% [0.1–2.6%]6 studies
- Meat, poultry and seafood0.7% [0.1–2.6%]6 studies
- Fruit and vegetable processing0.7% [0.1–2.5%]4 studies
- Grain and oilseed milling0.7% [0.1–2.5%]4 studies
- Sugar and confectionery0.7% [0.1–2.6%]4 studies
- Snacks, coffee, tea and other foods0.7% [0.1–2.4%]8 studies
- Animal feed and pet food0.7% [0.1–2.7%]5 studies
- Food manufacturing (unspecified or mixed)0.6% [0.1–2.3%]14 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe conveyor belt or its drive, rollers, bearings, motor or tracking components degrade or break, causing the belt to stop moving product through the packaging line. This typically results from mechanical wear, misalignment, belt tearing, or drive train failure that requires maintenance intervention to repair.
How it looks in SCADA data
Engineering guidanceSCADA logs show the conveyor motor stopping unexpectedly or drawing abnormal current, with a sustained machine-down state exceeding typical minor-stop duration and an associated fault or alarm code tied to the drive or safety interlock. Upstream and downstream equipment show starvation or blocking states as product accumulation or depletion propagates along the line.
Countermeasure
Engineering guidanceImplement preventive maintenance programs covering belt tension, alignment, lubrication and bearing inspection, and install condition monitoring (vibration, motor current, temperature) to detect degradation before failure. Maintain spare parts for critical drive components and train operators to recognize early warning signs of misalignment or wear.
4Sources
- การปรับปรุงแผนการบำรุงรักษาเชิงป้องกันเครื่องจักรของสายการผลิตเครื่องดื่มบรรจุภัณฑ์ชนิดกระป๋อง (2026)Open sourceNumber of events: 18.0 events · as reported: “Conveyor belt system”
Show verbatim quote
ระบบสายพานลำเลียง 18 14.40
- การปรับปรุงแผนการบำรุงรักษาเชิงป้องกันเครื่องจักรของสายการผลิตเครื่องดื่มบรรจุภัณฑ์ชนิดกระป๋อง (2026)Open sourceShare of loss events: 14.4 % · as reported: “Conveyor belt system”
Show verbatim quote
ระบบสายพานลำเลียง 18 14.40
- Lost time: 10.0 min · as reported: “Passadeiras verdes”
Show verbatim quote
Passadeiras verdes 1 100 80,33 € 10
- Number of events: 1.00 events · as reported: “Passadeiras verdes”
Show verbatim quote
Passadeiras verdes 1 100 80,33 € 10

