foratvise
Get Started
Equipment failure (breakdowns)

Conveyor line breakdown stoppage

Equipment failure (breakdowns)AvailabilityConveying and accumulation

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 59 % of the line's lost time. Reported by 1 of the 86 studies that could observe it (sparse evidence).

What happens

A mechanical, electrical or control fault develops in the conveying equipment (drive, motor, chain, belt, sensor or controller) and the line is stopped until a technician diagnoses and repairs the fault. Because the primary records only label the event generically as a general, repair or failure stop, the underlying failure mode is not further specified, but the common physical root is loss of function of a conveyor component that halts material transport.

What is done about it

Apply condition-based and preventive maintenance to critical conveyor components (drives, bearings, chains, sensors) and keep common spare parts available to shorten repair time. Standardize fault logging with specific failure codes instead of generic stop labels, and perform root-cause analysis on recurring breakdowns to redesign weak components or adjust maintenance intervals.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
59% [48–69%]
Studies / units
86 / 112
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–3.0%]11 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.1%]28 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.8%]12 studies
  • Bakery and pasta
    0.9% [0.1–3.2%]0 studies
  • Meat, poultry and seafood
    0.8% [0.1–3.0%]5 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.4%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–2.9%]4 studies
  • Sugar and confectionery
    0.8% [0.1–3.0%]4 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.9%]4 studies
  • Animal feed and pet food
    1.2% [0.1–4.5%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–2.9%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

A mechanical, electrical or control fault develops in the conveying equipment (drive, motor, chain, belt, sensor or controller) and the line is stopped until a technician diagnoses and repairs the fault. Because the primary records only label the event generically as a general, repair or failure stop, the underlying failure mode is not further specified, but the common physical root is loss of function of a conveyor component that halts material transport.

How it looks in SCADA data

Engineering guidance

The conveyor or line asset transitions to a fault or stopped machine state with an associated downtime counter that accumulates until a reset or run command is issued by maintenance; discrete fault/alarm codes (drive trip, motor overload, sensor loss) may appear without consistent coding across events. Upstream stations show blocking and downstream stations show starvation while the stop persists, and the event duration distribution is wide, spanning both short idling stops and longer repair interventions.

Countermeasure

Engineering guidance

Apply condition-based and preventive maintenance to critical conveyor components (drives, bearings, chains, sensors) and keep common spare parts available to shorten repair time. Standardize fault logging with specific failure codes instead of generic stop labels, and perform root-cause analysis on recurring breakdowns to redesign weak components or adjust maintenance intervals.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 87.0 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126
  2. Lost time: 178 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126
  3. Lost time: 126 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126
  4. Number of events: 634 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485
  5. Number of events: 589 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485
  6. Number of events: 485 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485
  7. Lost time: 38.0 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46
  8. Lost time: 41.0 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46
  9. Lost time: 46.0 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46
  10. Number of events: 277 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293
  11. Number of events: 265 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293
  12. Number of events: 293 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293
  13. Lost time: 28.0 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR(H) 28 121 71
  14. Lost time: 121 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR(H) 28 121 71
  15. Lost time: 71.0 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR(H) 28 121 71
  16. Number of events: 26.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53
  17. Number of events: 77.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53
  18. Number of events: 53.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53
  19. Lost time: 135 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126 135 123 30 651
  20. Lost time: 123 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126 135 123 30 651
  21. Lost time: 30.0 h · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Tempo Total de PG(H) 87 178 126 135 123 30 651
  22. Number of events: 578 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485 578 650 126 3062
  23. Number of events: 650 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485 578 650 126 3062
  24. Number of events: 126 events · as reported: “Parada Geral (PG)”
    Show verbatim quote
    Nº ocorrências PG 634 589 485 578 650 126 3062
  25. Lost time: 45.0 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46 45 46 09 217
  26. Lost time: 46.0 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46 45 46 09 217
  27. Lost time: 9.00 h · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Tempo Total de PF(H) 38 41 46 45 46 09 217
  28. Number of events: 294 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293 294 299 60 1488
  29. Number of events: 299 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293 294 299 60 1488
  30. Number of events: 60.0 events · as reported: “Paradas por Falha (PF)”
    Show verbatim quote
    Nº ocorrências PF 277 265 293 294 299 60 1488
  31. Lost time: 75.0 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR (H) 28 121 71 75 58 17 355
  32. Lost time: 58.0 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR (H) 28 121 71 75 58 17 355
  33. Lost time: 17.0 h · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Tempo Total de PR (H) 28 121 71 75 58 17 355
  34. Number of events: 59.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53 59 70 16 301
  35. Number of events: 70.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53 59 70 16 301
  36. Number of events: 16.0 events · as reported: “Paradas para Reparo (PR)”
    Show verbatim quote
    Nº ocorrências PR 26 77 53 59 70 16 301