foratvise
Get Started
Equipment failure (breakdowns)

Deficient corrective maintenance management

Equipment failure (breakdowns)AvailabilityCapping and seaming

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 58 % of the line's lost time. Reported by 2 of the 82 studies that could observe it (sparse evidence).

What happens

Equipment such as the capper/seamer breaks down repeatedly because preventive maintenance is poorly executed and corrective maintenance work is badly planned, prioritized and documented, so recurring failure modes like a defective mandrel or loss of head setting are never permanently fixed. Repairs are improvised, lack standard procedures and spare-part availability, which lengthens repair time and shortens the interval between failures.

What is done about it

Implement a structured maintenance management system (CMMS) with failure-mode analysis, defined preventive tasks, spare-parts stock and standardized repair procedures, tracking MTBF/MTTR to prioritize corrective actions. Train technicians in root-cause problem solving and audit the correctiv/preventive maintenance process to close recurring failure modes permanently.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.7% [0.1–2.0%]
Expected share of lost time
0.4% [0.1–1.2%]
Share of lost time when present
58% [47–68%]
Studies / units
82 / 109
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.8% [0.1–3.0%]11 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.4%]26 studies
  • Brewing, wine and spirits
    0.8% [0.1–3.0%]11 studies
  • Bakery and pasta
    0.9% [0.1–3.2%]0 studies
  • Meat, poultry and seafood
    1.2% [0.1–4.3%]7 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.2%]4 studies
  • Grain and oilseed milling
    0.8% [0.1–3.0%]3 studies
  • Sugar and confectionery
    0.8% [0.1–3.1%]3 studies
  • Snacks, coffee, tea and other foods
    0.8% [0.1–2.9%]4 studies
  • Animal feed and pet food
    0.8% [0.1–3.1%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.8% [0.1–3.0%]9 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Equipment such as the capper/seamer breaks down repeatedly because preventive maintenance is poorly executed and corrective maintenance work is badly planned, prioritized and documented, so recurring failure modes like a defective mandrel or loss of head setting are never permanently fixed. Repairs are improvised, lack standard procedures and spare-part availability, which lengthens repair time and shortens the interval between failures.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show frequent, short-interval unplanned stop codes on the same machine with deteriorating MTBF and growing MTTR trends, often clustered around the same fault description. Work-order history reveals repeated corrective interventions on identical components without closure of root cause, and downstream stations show starvation while the faulty machine is under repair.

Countermeasure

Engineering guidance

Implement a structured maintenance management system (CMMS) with failure-mode analysis, defined preventive tasks, spare-parts stock and standardized repair procedures, tracking MTBF/MTTR to prioritize corrective actions. Train technicians in root-cause problem solving and audit the correctiv/preventive maintenance process to close recurring failure modes permanently.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Mean event duration: 2.50 h · as reported: “mantenimiento correctivo (MTTR general)”
    Show verbatim quote
    MTTR General 2.5 h 2.61 h
  2. Time between events: 12.7 h · as reported: “mantenimiento correctivo (MTBF general)”
    Show verbatim quote
    MTBF General 12.71 h 27.81 h
  3. Number of events: 122 events · as reported: “mantenimiento correctivo (MC)”
    Show verbatim quote
    La frecuencia de MC es de 122 para el proceso actual y 61 para el proceso propuesto.
  4. Mean event duration: 2.72 h · as reported: “mantenimiento correctivo (MTTR)”
    Show verbatim quote
    MTTR Cerradora 2.72 h 3.75 h
  5. Time between events: 21.4 h · as reported: “mantenimiento correctivo (MTBF)”
    Show verbatim quote
    MTBF Cerradora 21.43 h 94.06 h
  6. Lost time: 220 h · as reported: “mantenimientos correctivos (mandril defectuoso y desconfiguración)”
    Show verbatim quote
    teniendo varios mantenimientos correctivos con un total de 220.38 horas, donde el programa es de 12h/año
  7. Mean event duration: 11.2 h · as reported: “proceso de ejecución de mantenimiento correctivo”
    Show verbatim quote
    Teniendo un total de 11.15 horas en el proceso de ejecución para la máquina cerradora.
  8. Mean event duration: 12.2 h · as reported: “proceso completo de gestión de mantenimiento correctivo”
    Show verbatim quote
    la recepción de requerimientos de MC, diagnóstico, elaboración de informa, compras, pruebas de equipos y entrega de equipos de 12.21 horas a 4.66 horas
  9. Share of lost time: 23.3 % · as reported: “Incorrecto mantenimiento preventivo”
    Show verbatim quote
    Incorrecto mantenimiento preventivo 23.29% 2.33% 20.96%
  10. Share of lost time: 13.2 % · as reported: “Incorrecta planificación del mantenimiento correctivo”
    Show verbatim quote
    Incorrecta planificación del mantenimiento correctivo 13.21% 1.32% 11.89%
  11. Share of lost time: 2.33 % · as reported: “incorrecto mantenimiento preventivo”
    Show verbatim quote
    Incorrecto mantenimiento preventivo 2.33%
  12. Share of lost time: 1.32 % · as reported: “inadecuada planificación del mantenimiento correctivo”
    Show verbatim quote
    Incorrecta planificación del mantenimiento correctivo 1.32%