Crown cap sorter sensor malfunction
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 57 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
The optical or inductive sensor that detects orientation or presence of crown caps in the sorter bowl degrades, gets fouled, or loses calibration, so the sorter can no longer correctly discriminate properly oriented caps from misaligned ones. This causes the sorter to stop feeding caps to the capping head or to feed them erratically, interrupting the closing process on the filling line.
What is done about it
Implement scheduled cleaning and calibration checks of the sorter sensors, replace sensors showing drift before failure, and use redundant or self-diagnostic sensors with automatic alarm thresholds. Keep spare sensor modules on hand for fast swap to minimize line stoppage.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.4% [0.1–1.1%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 57% [45–67%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.7%]18 studies
- Soft drinks, bottled water and juices0.4% [0.0–1.4%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.6%]16 studies
- Bakery and pasta0.5% [0.0–1.9%]0 studies
- Meat, poultry and seafood0.5% [0.0–1.9%]6 studies
- Fruit and vegetable processing0.5% [0.0–1.8%]4 studies
- Grain and oilseed milling0.5% [0.0–1.8%]6 studies
- Sugar and confectionery0.5% [0.0–1.7%]3 studies
- Snacks, coffee, tea and other foods0.5% [0.0–1.8%]6 studies
- Animal feed and pet food0.5% [0.0–1.7%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.6%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe optical or inductive sensor that detects orientation or presence of crown caps in the sorter bowl degrades, gets fouled, or loses calibration, so the sorter can no longer correctly discriminate properly oriented caps from misaligned ones. This causes the sorter to stop feeding caps to the capping head or to feed them erratically, interrupting the closing process on the filling line.
How it looks in SCADA data
Engineering guidanceSCADA/MES shows a discrete sensor fault alarm or signal-out-of-range flag on the crown sorter, followed by a drop in cap feed rate or empty-chute detection, and a machine-state transition to fault/stopped. The downstream capper and upstream filler typically register starvation or idle states correlated in time with the sorter alarm.
Countermeasure
Engineering guidanceImplement scheduled cleaning and calibration checks of the sorter sensors, replace sensors showing drift before failure, and use redundant or self-diagnostic sensors with automatic alarm thresholds. Keep spare sensor modules on hand for fast swap to minimize line stoppage.
4Sources
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Open sourceLost time: 8.00 min · as reported: “Crown sorter sensor malfunction”
Show verbatim quote
Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55
- Efficiency Improvement of Glass Bottle Filler Machine Using Autonomous Maintenance-A Case Study (2025)Open sourceShare of lost time: 0.550 % · as reported: “Crown sorter sensor malfunction”
Show verbatim quote
Crown sorter sensor malfunction 0 8 0 0 0 0 8 0.55

