Crusher jam from oversized foreign material
In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 53 % of the line's lost time. Reported by 0 of the 43 studies that could observe it (sparse evidence).
What happens
Stones or other hard objects larger than the crusher inlet gap enter with the raw material stream and become wedged between the crushing elements (rolls, hammers or jaws), stalling the mechanism and halting material flow until the obstruction is removed.
What is done about it
Add upstream size screening or a dedicated stone/foreign-object trap before the crusher inlet, and equip the crusher with overload protection plus an automatic reverse or gap-release mechanism to clear oversized objects without manual intervention.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.5% [0.1–1.6%]
- Expected share of lost time
- 0.3% [0.0–0.8%]
- Share of lost time when present
- 53% [41–64%]
- Studies / units
- 43 / 48
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.6% [0.0–2.5%]5 studies
- Soft drinks, bottled water and juices0.6% [0.0–2.4%]1 study
- Brewing, wine and spirits0.6% [0.0–2.3%]0 studies
- Bakery and pasta0.6% [0.0–2.5%]0 studies
- Meat, poultry and seafood0.6% [0.1–2.5%]0 studies
- Fruit and vegetable processing0.6% [0.0–2.5%]2 studies
- Grain and oilseed milling0.6% [0.0–2.4%]7 studies
- Sugar and confectionery0.6% [0.0–2.3%]10 studies
- Snacks, coffee, tea and other foods0.6% [0.0–2.3%]5 studies
- Animal feed and pet food0.6% [0.0–2.2%]6 studies
- Food manufacturing (unspecified or mixed)0.6% [0.0–2.4%]7 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceStones or other hard objects larger than the crusher inlet gap enter with the raw material stream and become wedged between the crushing elements (rolls, hammers or jaws), stalling the mechanism and halting material flow until the obstruction is removed.
How it looks in SCADA data
Engineering guidanceSudden motor current or torque surge followed by an overload trip or stall, throughput or weight signal dropping to zero while the crusher remains in run state, and a short unplanned stop logged with manual clearing time; downstream equipment shows starvation during the event.
Countermeasure
Engineering guidanceAdd upstream size screening or a dedicated stone/foreign-object trap before the crusher inlet, and equip the crusher with overload protection plus an automatic reverse or gap-release mechanism to clear oversized objects without manual intervention.
4Sources
- Production Model to increase OEE through the application of Lean Manufacturing and Total Production Maintenance tools in animal feed manufacturing SMEs (2023)Open sourceShare of lost time: 19.9 % · as reported: “crusher clogging due to very large stones”
Show verbatim quote
the crusher clogging due to very large stones represents a lower percentage of 19.88%, which makes visible how this cause affects the indicator.

