foratvise
Get Started
Process defects (scrap and rework)

Defective incoming pouch from supplier

Process defects (scrap and rework)QualityFilling

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).

What happens

Empty pouches arrive from the supplier with latent defects such as pinholes, weak or misaligned seals, deformed spouts or printing flaws that are not detected before filling. When these pouches are filled and sealed, the pre-existing defect leads to leakage, bursting, poor seal integrity or cosmetic rejection at inspection, even though the filling equipment itself is operating correctly.

What is done about it

Strengthen incoming quality control with sampling inspection or automated vision checks of empty pouches before filling, and track defect rates by supplier and lot to trigger corrective action or lot rejection. Formalize supplier specifications and audits, and establish feedback loops so recurring defect patterns are escalated to the pouch supplier for root-cause correction.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.1%]
Expected share of lost time
0.2% [0.0–0.5%]
Share of lost time when present
48% [36–60%]
Studies / units
120 / 162
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]18 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.4%]44 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]16 studies
  • Bakery and pasta
    0.5% [0.0–1.9%]0 studies
  • Meat, poultry and seafood
    0.4% [0.0–1.5%]6 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.7%]4 studies
  • Grain and oilseed milling
    0.4% [0.0–1.8%]6 studies
  • Sugar and confectionery
    0.5% [0.0–1.8%]3 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.7%]6 studies
  • Animal feed and pet food
    0.4% [0.0–1.7%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Empty pouches arrive from the supplier with latent defects such as pinholes, weak or misaligned seals, deformed spouts or printing flaws that are not detected before filling. When these pouches are filled and sealed, the pre-existing defect leads to leakage, bursting, poor seal integrity or cosmetic rejection at inspection, even though the filling equipment itself is operating correctly.

How it looks in SCADA data

Engineering guidance

MES/quality data show elevated reject counts at checkweigher or vision inspection stations with defect codes pointing to pouch integrity (leak, seal, print) rather than filler faults, while filler machine states remain in normal run with no equipment alarms. Rejects often cluster by supplier batch or pouch lot rather than by time of day or shift.

Countermeasure

Engineering guidance

Strengthen incoming quality control with sampling inspection or automated vision checks of empty pouches before filling, and track defect rates by supplier and lot to trigger corrective action or lot rejection. Formalize supplier specifications and audits, and establish feedback loops so recurring defect patterns are escalated to the pouch supplier for root-cause correction.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of loss events: 2.00 % · as reported: “Defective pouch from supplier”
    Show verbatim quote
    Defective pouch from supplier 97 2
  2. Number of events: 97.0 units · as reported: “Defective pouch from supplier”
    Show verbatim quote
    Defective pouch from supplier 97 2