foratvise
Get Started
Process defects (scrap and rework)

Defective packaging bags

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 48 % of the line's lost time. Reported by 0 of the 112 studies that could observe it (sparse evidence).

What happens

Bags or sacks supplied to pack the formed product carry manufacturing flaws such as weak seams, pinholes, misaligned gussets or inconsistent film thickness. When these bags are filled and sealed on the line, the flaw propagates into tearing, leakage, poor seal integrity or distorted shape, so the finished pack fails specification at first pass even though the upstream process ran normally.

What is done about it

Qualify and audit bag suppliers with incoming checks on seam strength, film integrity and dimensional consistency, store bag stock under controlled humidity and temperature, and add in-line bag-integrity or vision checks before and after filling so defective bags are diverted before they generate downstream scrap or seal failures.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.4% [0.1–1.2%]
Expected share of lost time
0.2% [0.0–0.6%]
Share of lost time when present
48% [35–60%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.4% [0.0–1.6%]14 studies
  • Soft drinks, bottled water and juices
    0.4% [0.0–1.4%]33 studies
  • Brewing, wine and spirits
    0.4% [0.0–1.6%]14 studies
  • Bakery and pasta
    0.5% [0.0–2.0%]6 studies
  • Meat, poultry and seafood
    0.5% [0.0–1.9%]6 studies
  • Fruit and vegetable processing
    0.4% [0.0–1.8%]4 studies
  • Grain and oilseed milling
    0.5% [0.0–1.8%]4 studies
  • Sugar and confectionery
    0.5% [0.0–1.8%]4 studies
  • Snacks, coffee, tea and other foods
    0.4% [0.0–1.6%]8 studies
  • Animal feed and pet food
    0.5% [0.0–1.9%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.4% [0.0–1.7%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Bags or sacks supplied to pack the formed product carry manufacturing flaws such as weak seams, pinholes, misaligned gussets or inconsistent film thickness. When these bags are filled and sealed on the line, the flaw propagates into tearing, leakage, poor seal integrity or distorted shape, so the finished pack fails specification at first pass even though the upstream process ran normally.

How it looks in SCADA data

Engineering guidance

Appears in packaging-module data as elevated reject or downgrade counts tagged to bag or seal faults, repeated short stops for bag jams or torn-bag clearance that do not generate a formal maintenance fault, and intermittent weight-check or vision-inspection failures correlated with specific bag batches rather than with upstream equipment states.

Countermeasure

Engineering guidance

Qualify and audit bag suppliers with incoming checks on seam strength, film integrity and dimensional consistency, store bag stock under controlled humidity and temperature, and add in-line bag-integrity or vision checks before and after filling so defective bags are diverted before they generate downstream scrap or seal failures.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Number of events: 0.900 bags/round · as reported: “defective bags”
    Show verbatim quote
    Defective bags 0.9 0.867 3.80%