Depalletizer/Unpacker Equipment Failure
In short
It appears in about 1 of every 100 lines studied.
When it appears, it takes on average about 58 % of the line's lost time. Reported by 2 of the 86 studies that could observe it (sparse evidence).
What happens
The machine that removes empty containers from pallets or cases loses function due to mechanical, electrical, pneumatic or sensing component breakdown, such as gripper, lift, clamp, motor or sensor faults. The fault halts the infeed to the rest of the line until maintenance intervenes to repair or replace the failed component.
What is done about it
Apply preventive and condition-based maintenance to grippers, lifting mechanisms, clamps, motors and sensors, including lubrication, wear inspection and timely replacement of critical parts. Keep critical spares on hand and perform root-cause failure analysis after repeated faults to eliminate recurring failure modes.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.7% [0.1–1.9%]
- Expected share of lost time
- 0.4% [0.1–1.1%]
- Share of lost time when present
- 58% [47–67%]
- Studies / units
- 86 / 112
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.8% [0.1–2.9%]11 studies
- Soft drinks, bottled water and juices0.7% [0.1–2.2%]28 studies
- Brewing, wine and spirits1.1% [0.1–3.9%]12 studies
- Bakery and pasta0.8% [0.1–3.0%]0 studies
- Meat, poultry and seafood0.8% [0.1–3.0%]5 studies
- Fruit and vegetable processing0.8% [0.1–3.2%]4 studies
- Grain and oilseed milling0.8% [0.1–3.1%]4 studies
- Sugar and confectionery0.8% [0.1–3.2%]4 studies
- Snacks, coffee, tea and other foods0.8% [0.1–2.9%]4 studies
- Animal feed and pet food0.8% [0.1–3.0%]5 studies
- Food manufacturing (unspecified or mixed)0.8% [0.1–3.0%]9 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceThe machine that removes empty containers from pallets or cases loses function due to mechanical, electrical, pneumatic or sensing component breakdown, such as gripper, lift, clamp, motor or sensor faults. The fault halts the infeed to the rest of the line until maintenance intervenes to repair or replace the failed component.
How it looks in SCADA data
Engineering guidanceSCADA/MES logs show the depalletizer or unpacker transitioning to a fault or down state with an associated alarm code, often recurring on the same subsystem. Downstream conveyors and the filler show starvation states while the upstream buffer empties, and the stop duration typically exceeds the short-stop threshold.
Countermeasure
Engineering guidanceApply preventive and condition-based maintenance to grippers, lifting mechanisms, clamps, motors and sensors, including lubrication, wear inspection and timely replacement of critical parts. Keep critical spares on hand and perform root-cause failure analysis after repeated faults to eliminate recurring failure modes.
4Sources
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceLost time: 240 min · as reported: “DM”
Show verbatim quote
Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceLost time: 265 min · as reported: “UM”
Show verbatim quote
Total 2540 485 500 560 450 265 225 240 220 5485 224940 2.44%
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceNumber of events: 7.00 events · as reported: “UM”
Show verbatim quote
Total 61 21 24 22 17 7 11 10 8 181
- Study on Preventive Maintenance Strategies of Filling Equipment Based on Reliability-Cantered Maintenance (2021)Open sourceNumber of events: 10.0 events · as reported: “DM”
Show verbatim quote
Total 61 21 24 22 17 7 11 10 8 181

