foratvise
Get Started
Idling and minor stops (micro-stops)

Metal detector or inkjet coder malfunction

Idling and minor stops (micro-stops)PerformanceWhole line or unspecified equipment

In short

It appears in fewer than 1 of every 100 lines studied.

When it appears, it takes on average about 52 % of the line's lost time. Reported by 1 of the 127 studies that could observe it (sparse evidence).

What happens

Auxiliary inspection and marking devices such as metal detectors and inkjet coders can malfunction due to sensor drift, false triggering, electrical faults or clogged print nozzles, interrupting the normal flow of product along the line. Minor faults are usually cleared quickly by the operator, while more serious electrical or mechanical failures require maintenance intervention before the device can resume normal operation.

What is done about it

Standard practice is to keep a preventive maintenance and calibration schedule for the metal detector, including periodic sensitivity checks and cleaning of the aperture, and a parallel preventive maintenance routine for the inkjet coder covering nozzle cleaning, ink level checks and electrical connection inspection. Keeping critical spare parts and print heads on hand shortens repair time when a hard failure occurs.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.4%]
Expected share of lost time
0.3% [0.1–0.7%]
Share of lost time when present
52% [40–64%]
Studies / units
127 / 161
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.0%]13 studies
  • Soft drinks, bottled water and juices
    0.7% [0.1–2.4%]26 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]11 studies
  • Bakery and pasta
    0.5% [0.1–1.9%]24 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.0%]9 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.3%]7 studies
  • Grain and oilseed milling
    0.6% [0.1–2.1%]6 studies
  • Sugar and confectionery
    0.6% [0.1–2.1%]9 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.3%]5 studies
  • Animal feed and pet food
    0.6% [0.1–2.2%]7 studies
  • Food manufacturing (unspecified or mixed)
    0.6% [0.1–2.2%]10 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Auxiliary inspection and marking devices such as metal detectors and inkjet coders can malfunction due to sensor drift, false triggering, electrical faults or clogged print nozzles, interrupting the normal flow of product along the line. Minor faults are usually cleared quickly by the operator, while more serious electrical or mechanical failures require maintenance intervention before the device can resume normal operation.

How it looks in SCADA data

Engineering guidance

SCADA/MES logs show frequent short-duration stop events tagged to the metal detector station, often with reject or alarm counters incrementing without a corresponding product reject, alongside occasional longer downtime events flagged with an inkjet printer or coder fault code. Upstream buffers fill and downstream stations starve during these events, and the machine state record alternates between running and stopped with no changeover or product-related tag.

Countermeasure

Engineering guidance

Standard practice is to keep a preventive maintenance and calibration schedule for the metal detector, including periodic sensitivity checks and cleaning of the aperture, and a parallel preventive maintenance routine for the inkjet coder covering nozzle cleaning, ink level checks and electrical connection inspection. Keeping critical spare parts and print heads on hand shortens repair time when a hard failure occurs.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 9.00 % · as reported: “Injetora de Tinta”
    Show verbatim quote
    observou-se, Figura 50, que 70% das paradas de linha estavam relacionadas a problemas no equipamento da Klockner, 16% por problemas de fornecimento de energia e 9% por problemas na máquina de injetora de tinta que faz as identificações nas bolsas plásticas.
  2. Lost time: 15.0 min · as reported: “Detetor de metais”
    Show verbatim quote
    Detetor de metais 12 130,1 154,35 € 15
  3. Number of events: 12.0 events · as reported: “Detetor de metais”
    Show verbatim quote
    Detetor de metais 12 130,1 154,35 € 15