In short
It appears in fewer than 1 of every 100 lines studied.
When it appears, it takes on average about 56 % of the line's lost time. Reported by 0 of the 120 studies that could observe it (sparse evidence).
What happens
During changeover or line restart the filler must wait because the required empty containers (carboys/jugs) have not yet been washed, depalletized or brought to the infeed, so the filling head has no vessel to fill. This logistical gap extends the time between the last good unit of the previous run and the first good unit of the next.
What is done about it
Build a buffer stock of washed empty containers ahead of the changeover and synchronize the schedule of the washer/depalletizer with the filler's changeover plan so containers arrive on time. Reviewing container logistics and increasing buffer conveyor capacity reduces this waiting time.
Practical guidance written from engineering knowledge; it is not a statistical estimate.
1Probability and evidence
- Probability of presence
- 0.3% [0.1–1.0%]
- Expected share of lost time
- 0.2% [0.0–0.6%]
- Share of lost time when present
- 56% [44–67%]
- Studies / units
- 120 / 162
- Evidence grade
- D
Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.
2Probability by segment
- Dairy products0.4% [0.0–1.4%]18 studies
- Soft drinks, bottled water and juices0.3% [0.0–1.2%]44 studies
- Brewing, wine and spirits0.4% [0.0–1.4%]16 studies
- Bakery and pasta0.4% [0.0–1.6%]0 studies
- Meat, poultry and seafood0.4% [0.0–1.5%]6 studies
- Fruit and vegetable processing0.4% [0.0–1.7%]4 studies
- Grain and oilseed milling0.4% [0.0–1.5%]6 studies
- Sugar and confectionery0.4% [0.0–1.6%]3 studies
- Snacks, coffee, tea and other foods0.4% [0.0–1.6%]6 studies
- Animal feed and pet food0.4% [0.0–1.7%]4 studies
- Food manufacturing (unspecified or mixed)0.4% [0.0–1.5%]13 studies
3Mechanism, SCADA signature and countermeasure
Mechanism
Engineering guidanceDuring changeover or line restart the filler must wait because the required empty containers (carboys/jugs) have not yet been washed, depalletized or brought to the infeed, so the filling head has no vessel to fill. This logistical gap extends the time between the last good unit of the previous run and the first good unit of the next.
How it looks in SCADA data
Engineering guidanceThe filler state log shows an idle or standby state with zero container presence at the infeed sensor while upstream equipment (washer, depalletizer, conveyor) shows no discharge activity; the gap is logged as part of the changeover duration rather than as a fault alarm. Starvation flags appear on the filler's infeed conveyor counters.
Countermeasure
Engineering guidanceBuild a buffer stock of washed empty containers ahead of the changeover and synchronize the schedule of the washer/depalletizer with the filler's changeover plan so containers arrive on time. Reviewing container logistics and increasing buffer conveyor capacity reduces this waiting time.
4Sources
- Lost time: 10.0 min · as reported: “Esperar por garrafas”
Show verbatim quote
20 Esperar por garrafas 10 0
- Lost time: 0 min · as reported: “Esperar por garrafas”
Show verbatim quote
20 Esperar por garrafas 10 0

