foratvise
Get Started
Idling and minor stops (micro-stops)

Fallen Product Requiring Cleanup

Idling and minor stops (micro-stops)PerformancePackaging (forming, sealing, wrapping, case packing, palletizing)

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 53 % of the line's lost time. Reported by 1 of the 112 studies that could observe it (sparse evidence).

What happens

Containers, packs or product units lose stability on the conveyor or at a transfer point on the packaging machine and fall off the line, often due to misalignment, uneven surfaces, vibration or an upstream jam. The operator must stop the equipment briefly to retrieve the fallen items and wipe or clean the area before restarting, since spilled product can contaminate the line or cause further jams.

What is done about it

Add guide rails, side guards or stabilizing guides at transfer points and conveyor curves to prevent product from tipping or falling, and correct conveyor alignment and surface leveling. Install sensors to detect unstable product flow early and trigger a controlled slow-down, and establish a standard quick-clean procedure to minimize the time lost when a fall does occur.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.5% [0.1–1.5%]
Expected share of lost time
0.3% [0.1–0.8%]
Share of lost time when present
53% [41–65%]
Studies / units
112 / 155
Evidence grade
D

Grade D: 0 or 1 study; the estimate is driven by partial pooling and priors, and the wide interval is the result.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    0.6% [0.1–2.3%]14 studies
  • Soft drinks, bottled water and juices
    0.5% [0.1–1.8%]33 studies
  • Brewing, wine and spirits
    0.6% [0.1–2.2%]14 studies
  • Bakery and pasta
    0.6% [0.1–2.3%]6 studies
  • Meat, poultry and seafood
    0.6% [0.1–2.4%]6 studies
  • Fruit and vegetable processing
    0.6% [0.1–2.4%]4 studies
  • Grain and oilseed milling
    0.6% [0.1–2.3%]4 studies
  • Sugar and confectionery
    0.6% [0.1–2.5%]4 studies
  • Snacks, coffee, tea and other foods
    0.6% [0.1–2.0%]8 studies
  • Animal feed and pet food
    0.6% [0.1–2.4%]5 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.1%]14 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Containers, packs or product units lose stability on the conveyor or at a transfer point on the packaging machine and fall off the line, often due to misalignment, uneven surfaces, vibration or an upstream jam. The operator must stop the equipment briefly to retrieve the fallen items and wipe or clean the area before restarting, since spilled product can contaminate the line or cause further jams.

How it looks in SCADA data

Engineering guidance

Appears as frequent short stop events in the minor-stop counter with manual-clear or operator-intervention flags rather than maintenance work orders; line speed drops momentarily and downstream stations show starvation while upstream units show blocking during the stop. Stop durations cluster below the maintenance threshold and no fault code tied to a mechanical failure is raised.

Countermeasure

Engineering guidance

Add guide rails, side guards or stabilizing guides at transfer points and conveyor curves to prevent product from tipping or falling, and correct conveyor alignment and surface leveling. Install sensors to detect unstable product flow early and trigger a controlled slow-down, and establish a standard quick-clean procedure to minimize the time lost when a fall does occur.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Share of lost time: 7.94 % · as reported: “Fallen product and Cleaning”
    Show verbatim quote
    Fallen product and Cleaning 7.94% 10.09% 31.47%
  2. Share of lost time: 31.5 % · as reported: “Fallen product and Cleaning”
    Show verbatim quote
    Fallen product and Cleaning 7.94% 10.09% 31.47%