foratvise
Get Started
Equipment failure (breakdowns)

Filler inlet guide jam/failure

Equipment failure (breakdowns)AvailabilityFilling

In short

It appears in about 1 of every 100 lines studied.

When it appears, it takes on average about 57 % of the line's lost time. Reported by 2 of the 120 studies that could observe it (limited evidence).

What happens

Containers entering the filler infeed become trapped, tilted or wedged against the guide rails due to misalignment, wear or mechanical damage of the guide components, interrupting the smooth transfer of containers into the filling stations. When the guide itself fails or deforms, the infeed lane jams repeatedly and requires mechanical repair rather than a simple operator clear.

What is done about it

Inspect and realign or replace worn/bent guide rails and adjust them to the current container format, add wear-resistant materials or sensors to detect incipient jams, and include the guide assembly in scheduled preventive maintenance.

Practical guidance written from engineering knowledge; it is not a statistical estimate.

1Probability and evidence

Pooled over all segments. A wide interval is a result: it states how much the evidence allows us to know.
Probability of presence
0.8% [0.2–1.9%]
Expected share of lost time
0.4% [0.1–1.1%]
Share of lost time when present
57% [46–67%]
Studies / units
120 / 162
Evidence grade
C

Grade C: 2 to 4 studies, or an interval wider than 0.35.

2Probability by segment

Partially pooled estimates for each industry segment.
  • Dairy products
    1.2% [0.2–3.9%]18 studies
  • Soft drinks, bottled water and juices
    0.9% [0.1–2.7%]44 studies
  • Brewing, wine and spirits
    0.8% [0.1–2.8%]16 studies
  • Bakery and pasta
    1.0% [0.1–3.6%]0 studies
  • Meat, poultry and seafood
    0.9% [0.1–2.9%]6 studies
  • Fruit and vegetable processing
    0.9% [0.1–3.3%]4 studies
  • Grain and oilseed milling
    0.9% [0.1–3.2%]6 studies
  • Sugar and confectionery
    0.9% [0.1–3.6%]3 studies
  • Snacks, coffee, tea and other foods
    0.9% [0.1–3.0%]6 studies
  • Animal feed and pet food
    0.9% [0.1–3.2%]4 studies
  • Food manufacturing (unspecified or mixed)
    0.9% [0.1–3.0%]13 studies

3Mechanism, SCADA signature and countermeasure

Engineering guidance that helps recognise and address the cause; it is not part of the statistical estimate.

Mechanism

Engineering guidance

Containers entering the filler infeed become trapped, tilted or wedged against the guide rails due to misalignment, wear or mechanical damage of the guide components, interrupting the smooth transfer of containers into the filling stations. When the guide itself fails or deforms, the infeed lane jams repeatedly and requires mechanical repair rather than a simple operator clear.

How it looks in SCADA data

Engineering guidance

Infeed guide fault or jam alarm with the filler held in a non-productive state, repeated stoppages localized at the guide/infeed station, container presence sensors oscillating or stuck, and blocking of upstream conveying while the filler infeed is cleared or repaired.

Countermeasure

Engineering guidance

Inspect and realign or replace worn/bent guide rails and adjust them to the current container format, add wear-resistant materials or sensors to detect incipient jams, and include the guide assembly in scheduled preventive maintenance.

4Sources

Every extracted datum with its study, value and verbatim quote.
  1. Lost time: 430 min · as reported: “guide inlet filler”
    Show verbatim quote
    guide inlet filler 16 430 80 2265 71.42 64.42
  2. Number of events: 16.0 events · as reported: “guide inlet filler”
    Show verbatim quote
    guide inlet filler 16 430 80 2265 71.42 64.42
  3. Lost time: 7.60 h · as reported: “Guide jam”
    Show verbatim quote
    Atasco de guía 7,60 81%